Search:

Yup I've cleared them and some did go away.

It a 1997 corvette, I'm starting to think possibly a cluster issue. Oil pressure not reading on gauge but it does when logged. All wiring has been checked all grounds checked and cleaned. My real...

I did a pcm swap from a 98 to a 2002 style (411). Car runs and im pretty positive all wiring is correct. If you do a pcm swap and a cos do I have to do anything to bcm,dim? Is it required or just...

I have a turbo 1997 corvette that pretty much has all performance parts in it ( to keep it simple). I can elaborate if needed. Anyway I decided to re pin to a newer style 411 pcm. I now have a cos...

Ya I defiantly will check them out. I actually added 3 more from the block to the chasis. My engine was painted with 4 coats of thick paint and I can't remember if I removed the paint where the...

Well it's up and running:thumb_. My tuner sent me a new tune made a few changes and now it's running. One thing I noticed was my pcm wasn't showing a vin so I put mine in, not sure if that matters or...

16298

Ya I tried it unplugged and plugged in. Here is a log where it was actually showing timing and rpm. Its like it will run for a bit right after I reflash it then it wont. I Leaning toward electrical....

Maybe but vats is off. Is there something else tied into the anti theft?

It's actually a ls1 6.0 turbo nitrous setup, I have a start up tune but it won't stay running long like 3 seconds. Most of the time while cranking I'm seeing 0 timing. I repined to a newer ecu. So...

I'm also having this issue, did you ever resolve it, if so how?

One thing I noticed is that I'm not getting any spark advance during cranking, a few times it did but not usually. I noticed a few people had the same issues on this forum but it was never stated...

Thanks Joe, what I'm wondering is why it's not setting the dtc and going into sd mode, I believe all my parameters are set up to fail maf and go into sd mode. Maybe the car isn't running long enough...

162881628916290

I never touched the ve table. What I did was I paid for a mail order tune, then its suppose to get tuned my me logging it. I just wanted a start up tune for now just to verify the mechanical aspect...

I have a fast 3 bar map I believe, I bought it from speed inc about a year and a half ago. I was able to use it as my operating system wouldn't allow 3 bar. It didn't come with any data so I have...

I will do that and get a log. This is a totally different tune then before. Before it was a 97 operating system in hp tuners with a 2 bar map. Now the car has been repined for the new pcm 99+ for...

Im very new to tuning and im trying to get a head start for my tuner. My problem is my car only runs for a couple seconds then stalls. Sometimes it wont start at all. What I have is a 97 corvette...

Thanks again, that was the ticket. I never saved over the org cal_pid file so I had a few of them. I didn't realize you just kept all the files on one sheet. I didn't want to save over the template...

16247 Here is the pid I made. Maybe im missing a step I create it in note pad and save it. After that should it automatically appear in the pids? The reason I think I missed a step is because I...

Oh and that was the ticket, for getting my scan to work I had it selected as flashscan controller only. I was under the impression it did a auto detect. All is good now for that part lol. Next will...

16244 Is this what you are looking for?

http://www.efilive.com/documentation-tutorials is the site.

# ==============================================================================
# File details
# ------------
#
# This section...

I used the link from this site and also the tutorials on this site. On my tune the egr is enabled. I got to the cacl pid files from My Documents\EFILive\V7.5\User Configuration. I did what it said I...

I tried just hitting the record button at the bottom, it does the same thing. None of the gauges work or the graphs the only thing is the frames move. Also most of my pids, just basic ones like tps,...