Search:

i recently purchaced a 05 lly kodiak and it has a dsp 5 tune on it, im not a diesel tuner but can someone id what these tunes are? ie 40hp 80 hp tow ect i want to make sure they are mdt tunes and...

it does it in open loop also

thanks this ones throwing me for a loop, im sure im just overlooking something, crazy thing is it does it with the stock flash

weird issue that ive never come across, drive the car steady state 40 mph the commanded afr is 14.63 inj pw is 3.6ms then with no change to throttle position or load or rpm it drops to 2 ms, loaded...

i see in the cal

{B0178} Flex Fuel Option
{B0184} Flex Fuel Sensor Type


i changed them to yes and actual, pin 40 on ecm j1 cnnector, but doesent read. is it possible to get the ecm to read...

os 12613186
cal 12597883

2005 e40 corvette 6spd man

looking for the 2 bar cos3 for the e40 cant seem to find it

thanks

flashed a new controller with a manual trans camaro tune and worked perfectly

they must have stripped too much out of the tune when they made the gmpp cal

i had an issue similar with the gmpp controller and it was not failing the maf when it started and died immediately

if i load the tune with the 1 bar map and use a 1 bar map it starts and idles fine???

ls3 crate engine, installed supercharger , went back to the stock injector that was in the na setup for testing thought maybe it was the injector i was fighting, same intake tube same inj same tb ...

The tune file was loaded. The ctz file. I will get the ext pids logged. And yes wot the commanded goes to 11.74 then still at wot the target trails lean. Then when you get out of throttle it returns...

car has meth and iat is moved out of maf so the iat sees the meth, dont know if thats the issue

all ol tables set to 1 and pe at .8 floor the car it goes to 11.74 afr then starts to trail commanding lean?

ive got to be missing a table somewhere

attached is the log where right in the...

Is there a cax for that table? Or can you just set it all to 750. This car was tuned somewhere else and I really don't want to be married to this car. Just trying to help out a freind.

got a car that has a commanded idle issue. its a 70 implala swap with a current performance harness

in park the commanded idle follows the in p/n idle table when you shift it into gear it goes...

have a e67 in a caddilac that is hitting some sort of limiter on the 2-3 shift.

the trans is a 4l80 with a pcs tcm2000 controller

attached is the tune and the log

thanks

worked

thanks a bunch!!

the maf is removed its a harrop itb setup there is a iat sensor wired in

still no fail, no codes set

here is the log

e67 gmpp controller will not fail maf for sd what am i missing car fires then dies immediatly no maf codes





17988

13 auto zl1 and the e67 commanded afr pis is stuck on .30. I've validated pids rebooted computer. The software is up to date. Anyone have this issue?

You figure this out. Mines showing .30. Tried the e38 pid and that doesent work

truck is a 06 tbss awd with a e40 and i just installed the ls2 car throttle body and ive copied ove all the tables for the tb area ect from a e40 ls2 car and it has taken care of most problems, but i...

invlvtmp_dma reading wrong on logs it will read -160c and the table doesent go ghat low, trying to tune a e40 car sd and need to build a commanded lambda table