Search:

Like the title says we have tried over and over to get this thing logging with the serial output from the lc2. We have a cable from the out on the lc2-null modem adaptor- cable from there to the rj12...

So if I change all afr cells to something other that 14.63 to say 14.2 then it will affective make it open loop?

finally got my my friends Camaro with 414 lq4 engine idleing and driving good with some help of another tuner and since then its been running rich over the entire range and I have been trying to take...

Yes it is. We just turned the key on engine off to set the pressure to 58psi.

trying to build a tune for a 414 lq4 in my friends Camaro. mainly been workin on the main ve table trying to get the afr in check and while it sitting there it idles ok for the most part. when you...

update fixed the problems guys. thanks

We ordered a null modem adaptor and a serial to rj 12 cable to try.

here you go joecar

18797

Still no luck. Beginning to think something wrong with my v2

Thanks but I'm really really wanting to make this 0-5v input work. I used to use the same thing years ago on my turbo truck and worked fine and need to get this working tonight somehow. Any ideas...

In the efi live v7.5 scan tool yes. Just trying to understand why I can get the voltage to read

So I just installed a lc2 wideband and and using anolog output 2 off the wideband to connect to my orange connector for the v2 box 0-5v input. I set up the pids and am reading 2v on the plug with a...

Do I need to select a calc Ben in the pids to run the serial output on the wideband

Ok another question. I don't see the need at all to use a db9 connector. Can I connect the blue serial wire from the wideband directly to the correct wire in a rj12 cable so I can then just plug it...

Thanks so much for the info. Stayed tuned incase I need more help. Trying to find a rj12 connector to get it wired up

Thanks for the reply. Can you tell me how to find it in the scan tool to data log once that it wired in? Since this is not a normal pid to just turn on and start using

I need clear instructions on how to properly setup my aem wideband serial output to data log. I need to know what wiring and connectors I need to get to set it up this way. Is the best way to...