Thanks joecar!
Type: Posts; User: shallow bay; Keyword(s):
Thanks joecar!
Long story short, a long time ago I decided I needed to use COS 5 for a full bolt-on car. No idea why. Now I want to go back to the stock OS which is 12212156. Is there an easy way to copy all the...
It doesn't look like it.
http://www.efilive.com/supvehicle.aspx
Any specific areas that you recommend?
1/6 or 1/12
No, I don't believe so.
From my understanding, the PCM is constantly interpolating between the MAF and the VE table under 4000 RPMs (stock) or the value set in {B0120}. Anything above that RPM,...
...
That's perfectly normal for cold starts. It's the transition from running in open loop (B3605) to closed loop.
I read the whole post. I understand it depends on the seed but it definitely wouldn't hurt anything to try what was suggested. My response was more based on posts nine and ten in that thread.
...
If you haven't completely re-flashed the PCM yet, try this...
http://www.forum.efilive.com/showpost.php?p=17173&postcount=7
I believe ECT is the only parameter. Is the car throwing any codes?
I bought mine from Jesse (wait4me) for $75 plus shipping.
They are 30#.
How about the ability to compare different OS?
It sounds like you have the "Show cell count (Ctrl+=)" button selected. You will want to select the "Show average cell values (Ctrl+-)" button. It's located right underneath the PIDs tab.
During the AutoVE process, you need use the Base Efficiency Numerator (BEN) PID for your WB. This PID takes actual AFR and divides it by the commanded.
Incorrect. Just make sure when creating...
Go to C:\Program Files\EFILive\V7\Configuration and then click on the sae_generic file. The WB's are about 2/3 of the way down.
Doc, did you ever get a chance to scan those ABS/TCS wiring schematics?
EDIT: Nevermind, I found them.
http://forum.efilive.com/showpost.php?p=17864&postcount=21
I also had the same code. It was P1637 Generator 2 L-Terminal Circuit. From my understanding, there's a wire that goes from the alternator directly to the PCM on the 99+ vehicles. This circuit was...
Heated O2 Sensor Voltage Bank 1 - Sensor 1
Heated O2 Sensor Voltage Bank 2 - Sensor 1
Definitely not a stupid question. I didn't even think about that possibility. I confirmed today that traction control is actually off.
I was thinking the same thing but wanted to rule out all of...
Thanks, I appreciate it. :cheers:
{B4105} O2 Switch point
Anybody have a stock 02 Camaro/TransAm tune for a manual transmission with traction control? I checked Holden Crazy but it doesn't specify whether or not the car's have traction control. Ever since...
http://delphi.com/news/techpapers/