Search:

Type: Posts; User: TorqueMonster007; Keyword(s):

Page 1 of 3 1 2 3

Search: Search took 0.00 seconds.

  1. I did that and was able to get original stock...

    I did that and was able to get original stock tune out before TCM valve body swap. The original TCM tune from factory was the 24249179 OS file. The new TCM valve body that was put in during rebuild...
  2. Need to verify stock tune for new TCM

    Truck had trans rebuilt. In doing so the valve body and TCM was changed on the 6L80e in a 2009 5.3 Silverado. Original TCM OS is 24249179. New TCM that was sent for the rebuild is 24239353. Based...
  3. Replies
    1
    Views
    203

    Possibly a fuel pump issue? He also had been...

    Possibly a fuel pump issue? He also had been running regular gas and I had him fill up with 93oct to allow fuel trims to relearn with better fuel.
  4. Replies
    1
    Views
    203

    Lq9 Swap bucking under WOT

    Have a neighbor that does body work. Bought a wrecked 05 2500HD and fixed it. Then had a fella he knows put a Lq9 in it with a BTR truck cam (212/218 @111lsa .553/.553 lift) This said installer...
  5. I have read through the VVE tuning tutorial...

    I have read through the VVE tuning tutorial briefly in the time I have had to do so. From what I have gathered (and please correct me if I am wrong), is that you can make changes to each "zone" and...
  6. Anybody have anything? Suggestions? Was there...

    Anybody have anything? Suggestions? Was there something that defaulted with the update I wasn't aware of?
  7. VE smoothing function not working as it did before update

    Just updated to V8 3.5 and associated V7.5. I have noticed that on E38,E67 and E92 ECMs that both V8 and V7 editors will not save small commanded VE changes but will only average out large changes...
  8. VE Adjustments issue with latest update

    Just updated to V8 3.5 and associated V7.5. I have noticed that on E38,E67 and E92 ECMs that both V8 and V7 editors will not save small commanded VE changes but will only average out large changes...
  9. Replies
    10
    Views
    1,600

    I do not yet. Was building a base table but...

    I do not yet. Was building a base table but haven't had time to get it on the road yet. I have a Innovate LM-2 I use. Do you see anything that sticks out to you on the modified file vs the...
  10. Replies
    10
    Views
    1,600

    Alright. Here they are. The "Original" is what...

    Alright. Here they are. The "Original" is what was pulled out of the truck when I got it and would barely run. The "Modified2" is the base file I started working on to get started and a basis to...
  11. Replies
    10
    Views
    1,600

    Joecar, it must had been the platform I was...

    Joecar, it must had been the platform I was using (Google and not the new Internet Explorer). It looked different from the Google platform. Almost like I was unverified. Regardless if you went to...
  12. Replies
    10
    Views
    1,600

    I am not sure how to attached the tune? Seems...

    I am not sure how to attached the tune? Seems the format has changed since the last time I had been on.
  13. Replies
    10
    Views
    1,600

    I am going to get my computer out and post the...

    I am going to get my computer out and post the tune. I think based on what was said vs. what was put in the original trash tune it should be these injectors (see part # below). I have a flow rate...
  14. Replies
    10
    Views
    1,600

    I actually didn't take the time to look and see...

    I actually didn't take the time to look and see if a custom OS was available. I can post tune tomorrow as it is on my computer at work. I do not have the part numbers since it was all done before...
  15. Replies
    10
    Views
    1,600

    Looking through some of my E38 Gen4 stuff it...

    Looking through some of my E38 Gen4 stuff it looks like the scaling for the MAP is different with different references.
  16. Replies
    10
    Views
    1,600

    07.5-13 L92 Intake/Swap

    Just picked up truck that had a motor previously installed with a NNBS (07.5-13) intake and associated 823 casting L92s on a mildly cammed 6.0. Truck is a 2003 DBW rcsb original 5.3 truck. Truck has...
  17. Replies
    1
    Views
    684

    Question on Full Flashing T87

    I was able to locate a stock T87 file that matches the OS of the empty T87 that my friend has. He purchased this because he did not want to tune the factory 2016 t87 incase he had a converter issue...
  18. Need Stock Tune for T87 OS# 24281915

    Need a stock tune for T87 OS# 24281915 if someone could help me out? Thanks.
  19. I have an Innovate LM-2 but is not connect to the...

    I have an Innovate LM-2 but is not connect to the v2. But yes the throttle body issue appears to be fixed. If it is capable (and I will check) to be hooked in line via serial port to the v-2 then I...
  20. Yes. The cranking and idle down is better. The...

    Yes. The cranking and idle down is better. The initial cold starting is still off a little as it will crank and fire but once in gear and you give it throttle to move the truck (ex. pull it in...
  21. Good to know. Thanks.

    Good to know. Thanks.
  22. Thank you for the input and will try file and...

    Thank you for the input and will try file and report back with results. As I had said, not a professional by the slightest of the imagination but I did try and keep the file fairly close to factory...
  23. Team208 I am attaching the factory file pulled...

    Team208 I am attaching the factory file pulled from the truck. Note I had no part in the swap just helping with tuning. The motor was pulled from truck when cam swap and springs were done. I'm not...
  24. I’m helping a friend (since I have a v2 scan and...

    I’m helping a friend (since I have a v2 scan and tune) get his truck running and driving so he can get it driveable and to a shop for further tuning at a later date. With that being said the truck is...
  25. Electronic Throttle Body issue after cam swap

    I
Results 1 to 25 of 51
Page 1 of 3 1 2 3