Search:

Even if I have manually selected it won't bring up pids or anything.. also won't connect in scan and tune of I do manually.. tried 3 trucks.. all same thing.

I have latest software downloaded aswell. Firmware is all up to date aswell.. I'm lost

I just rescently ran into this problem. I go to connect to any truck it will not find the ecm.. it will not connect through scan tool either.. I redownloaded all software and devices same thing.. is...

'NLL' "No Limits Logging" prob not the best name but creative..lol

http://m.youtube.com/index?desktop_uri=%2F&gl=US#/profile?user=06dodgecr&view=videos&v=JGrud_rNElM

http://m.youtube.com/index?desktop_uri=%2F&gl=US#/profile?user=06dodgecr&view=videos&v=1JyDPILIAHU

Just started some tuning on 6.7 trucks. This is the first manual ive done 6.7. I have s couple issues so ill list them first.

1 my main injection rate will not get over 120mm3 no matter the...

why a 25* bias? I thought it was discussed as a 20*?? what injectors do you run hole wise and pattern? I run the 7 hole bosch motorsport nozzle.

You mean 30* no bias? im at 55* but with bias more like 35*

What's the rattle you speak of because I can get it to rattle with rp?? Your idea won't work but if you'd like to guinea pig a motor please tell us where it rattles to the point that it stops...

06 cummins

I'm getting a 0185 code when trying to read in scan and t
une??

well see tonight :)

Just checked it out my duration falls to about 1700 but that's what it commands when the mm3 starts to fall like that by 4300 I'm down to 86mm3. I'm going to try a new tune tom. It's got diff fp axis...

Ill check the log out tonight. let you know

Got it figured out have to start out with manual tune. I have 156mm3 to 4200 then drops to 136 at 4300 then I let out..

sorry kinda misread your post, I will get my charts out tonight from exergy on rates. Its just weird that it all of a sudden wont achieve more that 100mm3... It might be the fact that the trucks...

You want lpm? over over % these are 175% over nozzles I had 2 bad injectors on the last set they were replaced and new nozzles added to this set. these were made by exergy

my manual trucks will hold mm3 as well as autos.. My truck was a auto and held a good 160mm3 to 3600 then taperd to 130 by 4200. but I installed a manual and now it wont go past 100mm3 no matter what...

So I recently upgraded my injectors from my old set, with my old tune I was able to achieve 160mm3 up to around 3500 or so befor eit would fall down to about 130 at 4000. I have since installed the...

Tuning a truck for a friend. I made a pretty good tune for a stick truck not to long ago and was going to try to run this same tune on the auto truck.. I copied every tabel from stick truck.. the...