Search:

Okay, since it is obvious it wasn't a ground issue, I went and purchased a new micro USB cable. I left the old cable plugged in and then "uninstalled" it. I then installed the version you said and...

That worked. I had to change the button that said LS1B GenIII 99-08 and then clicked "Get Info" button and it filled in all the blank boxes plus gave a bunch of numbers in the open box below. ...

No. I can try to get a different one tomorrow. Is it a little weird that it works on the tuning tool though?

I did a "search" on my computer and found the EFI live USB manager and uninstalled it as you said. I then installed the version V2.02.04 and plugged the cable back in and clicked okay. The box...

Okay, I was able to go to Start>All Programs>EFIlive.....but there is no V8. I have V7 or V7.5 choice and neither of those go to a EFI live USB Manager.

Will do.

Okay. I tried both the V1 USB and the V2.5 Hapi and the box unchecked. Same thing happened. This time I copied the information as you requested. Here it is......


11:18:08.100: EFILive V7.5...

I tried this and it did not work. I even closed everything down in the computer and started from scratch while the car was running. When I opened the scanning tool up it popped a box up that...

I am not at home right now but will try these things tonight. As far as the information asked. I have the V1 flashscan and I don't think it is battery voltage dropping because I fully charge my...

Thanks. I am getting there. I have a few issues they are trying to help me with in another thread.

I appologize but I am using my mac for the internet and the other computer to tune. It uses an air card and is a pain. I typed in the vin. I noticed that my choice was actually LS1B GenIII 99-08. ...

I did this for the tuning tool. I did not realize I also needed to do it for the scan tool. I did select the GenIII LS1 1999-2008

Also, is there a way to load the tutorials with my MAC computer? I only use the pc for the tuning. It sucks for trying to get internet, downloading, etc.. We live in the country. My mac is...

Okay, it worked. However, it would start to show "monitoring" like I wanted but it only did it for about 5 seconds and then popped up an error. I am using the same cable I use to open up the tuning...

Thanks. I'll go try it.

Okay, I am trying to read up on scanning. I opened the EFI Live Scan V7.5>Help>tutorials>scan tool tutorial. However, an Error box shows up that says "There is no application associated with the...

That is how we get 160lb low impedence injectors to idle like stock. I would rather do that and blow my engine up that only costs $500 to replace then spend $1600 on a set of high impedence...

I just got mine idling and running. I am now trying to learn how to log some data. How would I go about finding this information? My cam is a 224/230 .581/.588 on a 114. Also, is there a sticky...

I just wanted to post some updated info. First I have to thank my cousin Jeff who drove 7 hrs from Chicago to personally come down and find out what was going on with my tune. I greatly appreciate...

What would be the best way to check. They work fine with the pcm that has the HPtune. I would get some other injectors but I don't have a grand to lay down on some injectors when the car works...

I tried to take some pictures from under my dash. Not the best but I think you can see how we did it. We wired in a inline resistor to the power side. Basically cut the wire before the injector...

The picture is when we were building everything. Ie, not complete. I do have the reference hose hooked up. The fuel pressure is steady while trying to start it. It seems to initially jump up...

Here is a shot of my fuel regulator location.

http://i1009.photobucket.com/albums/af213/splitmastertiming/AirFilter3.jpg

Here is a picture of my control panel. Ignition switch, Push button...

My FPR is located at the rails. I have a -10 fuel lines from the tank to a "Y" fitting. A single -10 off the Y to another Y fitting before the fuel rails. I then have the FPR at the front of the...

We solved on issue and of course I now have another. I got the engine to fire up last night about 2am. If I turned the ignition on and the fuel pump on for about 3 seconds and then off, the car...