true.... been nice to be able to do everything on efi live... don't have the time...
Type: Posts; User: malibu795; Keyword(s):
true.... been nice to be able to do everything on efi live... don't have the time...
after multiple attempts... engine had no power... yanked the MPFI system off, put a MSD 6AL with blaster SS coil billet dis, edelbrock performer intake, fast ezi efi 1.0, oem fuel pump.. also swap to...
97 BBC doesn't have LS style heads iirc
I'm dumbing timing tables down until I get a handle on it.. mimicking the timing plot off my carb'd and go from there
The Gen 6 454s probably need more time I push 36
found a KPA absolute to inHg/psig chart that will help.. converted tables to G/sec
stuff is starting to click now...
do a working example.... engine I have is a 454 with 0411 ecm swap
displacement...
maybe I failed at articulating my question...
using table B5913 its using RPM and OZ/cyl to get/depict a timing value. what does collum information/value come from? the .011 .013, .014 etc numbers...
done decent amount of dmax stuff messing with gas now.. one thing I learned there is a flow chart on how the ECM processes info..
diesel was pretty simple.. it was TPS/RPM=fuel volume(MM3) then...
Swapped fuel pump hits 62psi with key on then drops to 58psi, used the bigger pump I mentioned
upon further parts review.. fuel pump I got is rated at 35GPH and 85psi swapping it out got the 58gph/110psi version
Here's some stuff I do with it.. grossed 25k
been going through it... been getting lean burn codes on the O2 and 1406, above 1/2 throttle engine tends to lay over on power dragging a 7k trailer and gets more noticeable the heavier I get......
Already Sent him a PM..
Can it still have the 411 swap done?
PM sent lextech
Following letters
Probably go 411 swap later.. got to go rescue my other truck.. I was hopeful to pull the TQ management out, deactivate EGR and remove the post O2s before I left
Out
BTW
Where's the 454 stuff...
Sorry not familiar with your background..
Same ecm
Yet according to Cindy's stick.. it's supported just nothing new...
Said flags
downloaded updated V7.5/V8 today.. still trying to get that mess sorted out. :ranting:
system doesn't recognize ecm calibrations... stuff is supposed to be supported.... its not in the download...
i got this after i closed and opened the system
Error report generated by EFILive at 18:38:22 on Dec 06, 2007
Error code: ERR_CONFIG/92
C:\Program...
i got one disc when i purchased V1 from guy trip
invalid or corupted
i down loaded it and un ziped it... but i can not read the file..
i think i am missing som basic compytore skills :frown: