I did a compare to an OS I have here and the only security difference I see is G1204 and 1213 are set to yes on my tune. If not try this not tune, it works for me:
19432
Type: Posts; User: VEGASROBBI; Keyword(s):
I did a compare to an OS I have here and the only security difference I see is G1204 and 1213 are set to yes on my tune. If not try this not tune, it works for me:
19432
I do have a BCM on the net, I am controlling the AC clutch off evaporator feedback. I have used E38's to control the fans off condenser pressure many times before without the HVAC controller or BCM....
Fans working perfect, thank you Taz.
Hi, I need help adding cooling fan control to this 6.0 L96 file. Any help is appreciated.
19343
Checking the "clear DTC" box did not work for me(tried twice), I used the previous method and it worked perfect.
Okay I will give that a try next time, thank you.
Thank You it worked perfect for me after spending an hour with no success.
Well the customer says after he installed the e-rod package it would not start. Towed it to the local Chevy dealer who told him the ecm was bad. They couldn't replace the ecm because it is not...
Possible. Customer says only dealer has worked on it but they may have. I'll do some checking.
Thanks
Says locked. Tried to unlock, use alt keys, etc, no luck.
Thanks for the reply.
I have tried to pull the tune out of two E67 E-Rod 5.3's with no luck. The vin is scrambled and I get various errors, ie bootloader rejected, rpm not zero, memory fault...
Scans just fine. Any...
Right, I have a new 2010 ECM sitting here. I was debating flashing it with the stock LY6/6l90 tune and giving it a shot; or, starting with a *.*/6l80 tune and bringing the changes in. I didn't think...
Thanks for the reply. That is my dilemma, I could see disabling AFM or making other small changes in a tune, but it must have VVT.
I have a customer with a 2010 6.0 VVT (vin K) from a HD truck with a 6l90. We only support the 6l80 transmission in our swaps. I can't find any tunes for the 6.0 and the 6l80. We are running a...
V7.5.7 (Build 209)
V8.2.1 (Build 200)
Thanks
I have had no luck with two 2011 Silverado's correcting the VSS. Any changes I make to the speedo parameters or gear ratio's have no effect; similar, to the problem I had a few years ago with the...
12765
Thanks Taz this helps, a comprehensive list of ecm service #'s vs OS's would be great.
I purchased a new ecm from our supplier, it is the same service number as the other one. The OS I...
I have read that document. I am confused as to the service number of the ECM vs. OS. The ECM I programmed was for an 08'-09'. While the document shows what OS's are compatible with each other I can...
I used TIS and a Tech II to rest a 2008 controller to a stock calibration, worked fine. Uploaded the tune to EFI Live, modded it and tried to download it. Apparently the Tech II set the PCM serial #...
Great, I'm gonna run this thing even if the MIL is on. Hopefully it won't be too long before they map the late model T43 diagnostics.
If it goes into limp I will swap in an earlier controller.
...
Good information, you have saved me a lot of time. We are fighting the same issue. U0121 sets the MIL and on some OS's P2534 if not set to "not reported" will make the trans go into limp.
I agree...
Thanks for the reply. So this means we can't turn off codes on 2010 + T43's and we cannot interchange the 2009 and earlier T43's for the later controller.
I ask because the 6l80 will go into limp...
I looked and none of the codes are there. I will send file, thanks.
Sent from my M886 using Tapatalk
We have installed a 5.3/6l80 into one of our Jeeps as usual. This is the first 2011 LS we have done. I pulled the tune out with the Tune tool and tried to get rid of a couple codes as before. When I...
I isolated the wires and relocated the amp. Put another 1500 miles on with no problem.