2014 3500HD diesel: going from stock 35 gallon tank to a 61 gallon tank, is there any way to recalibrate the stock "range" calculations displayed on the cluster?
thanks guys
Hog
Type: Posts; User: hog; Keyword(s):
2014 3500HD diesel: going from stock 35 gallon tank to a 61 gallon tank, is there any way to recalibrate the stock "range" calculations displayed on the cluster?
thanks guys
Hog
please delete, moved to correct forum thanks big CE
Here is some GEN 3/4 injectors
http://ls1tech.com/forums/fueling-injection/1571836-lsx-family-injector-flow-rate.html
peace
Hog
I just got an email from this address support@efilive.com
Here is the message, the entire message wont copy over here, but it was a bunch of weirdo text and some Facebook links...
That website is NO MORE. EFILive is cutting back.
peace
Hog
Everything in your quote is true, yes the actual firing order is hardwired and cannot be changed via recalibration, while the Injector to Bank assignment can be changed via calibration.
peace
Hog
So long as the Edelbrock Pico Injectors are high impedance, they can be controlled with the Vortec "blackbox" PCM's.
I just checked and the Edelbrock Pico injectors OHM at 14.9, so they are indeed a...
You will require some work for proper 4Lo shifting. Its all been done before around here.
peace
Hog
Are you up and running already on the 0411 on your L31? You are probably running some sort of 01-02 L31 express van calibration now.
If you are running a cable throttle, you will use a Camaro LS1...
What engine is in your 1999 S10?
You wont be able to change any tables that will undo the upgrade to the 0411 and the 24x reluctor.
peace
Hog
You could also use a Vortec 454 front timing cover(to hold teh crank sensor) and the GM L21 454 24x reluctor. The L21 454 was a BBC that used a 512kb dual 80 pin PCM(like the 0411). It came on the...
Lower your shift rpms and shift mph until it shifts where you want it to
peace
Hog
Typically an H-pipe is 2/3's the diameter of the rest of the exhaust. You can get some decent low-mid rpm torque with an H-pipe.
I read somewhere that you can take a crayon and with the exhaust...
Lingenfelter Stingray with a 2.3 charger/LPE cam on the stock injectors, no headwork . Not getting to WOT til middle of each gear due to tire spin. LT5 ZR-1 in the slower lane.
...
N ot necessarily, if you are removing teh cats, it would make sense to disable the cat protection protocol.
peace
Hog
CPP?
peace
Hog
H ah, ya, I did watch the whole video. Nice work.
I agree a 2.0 60 ft is a great short time, esp. with your mass. My 97 GMC Sierra 2wd reg cab shortbox weighs around 4000 lbs, stock Vortec 350...
Sorry I didnt watch theentire video, I shut it off as soon as I saw a picture of the GVRW circled/VIN scratched out titled "It's heavy".
I beg differ, most people do NOT know that the GVRW is...
Your car doesnt weigh 2042kg or 4501 lbs, thats its Gross Vehicle Weight Registration. Thats its max weight going down teh road with passengers and cargo that the car is rated for.. On the scales...
Zeroing tables eliminates Adaptive Shifting.
Dexron 6 atf.
peace
Hog
Negative Ghostrider, the kit has not been installed. I know of a few that have been though. A gentleman, callsign, Lextech, has installed the 24x reluctor kit on his 98 reg cab 2wd twin turbo Chev...
Yes its been quite the Winter. Its teh 1st time in 20 years that the Great Lakes are almost all frozen over. With global warming, the Winters will only get worse as the jets streams force that Polar...
Today is the Day of Remembrance dedicated to the 3 Apollo-1, STS-51-L Challenger and STS-107 Columbia.
info and comments from President Obama and NASA Administrator Astronaut General Charlie Bolden...
I agree that there has been some great work done here in the EFILive world, esp. by the guys you mentioned. I enjoy going back and reading those posts, some great stuff was accomplished.
I...
I would agree, hits pretty hard for WOT use on a stock TC.
What is your opiion for an aftermarket TC with a single clutch that has extra surface area? Would you lock a multidisk TC through WOT...