Search:

Can you please create a ticket on our help desk for support to look at your issue? https://service.efilive.com/new-ticket

Thanks
Cindy

Cummins platforms will move across to V8 in the very near future.

Cheers
Cindy

If you have checked OBD power (without USB connected) and you get the same result you could try booting FlashScan in one of the special power up modes listed here...

Thread closed, public release software now available. See here https://forum.efilive.com/showthread.php?29820-Current-Public-Release-November-2020

IMPORTANT


For users dealing with the V3 AutoCal products you must use this release and ensure that all devices have the firmware updated to the version in this release...

Hello,

From our Unlinking help file here https://service.efilive.com/kb/articles/autocal-v2-unlink

Once an AutoCal is unlinked;


It must be linked to another FlashScan prior to flashing...

Leading zeros won't have any impact with the software or the unlinking of the device.

Trevor,

Most common reasons are:

1. Blank space pasted at the start/end of the code.
2. FlashScan device used to generate the unlink code was different to the FlashScan device used to generate...

Joe; this *should be* resolved in RC1. We found an old Win7 laptop we found in the storage room, was able to replicate the issue and fixed it. Can you please test and report via the beta process?...

Post #1 was updated to beta 51(2). Can you please confirm you have that installation, not the earlier 51(1).
After updating, please ensure your firmware and configuration files are updated.

If...

You should be able to recover the ECM following the controller recovery process documented here https://service.efilive.com/kb/articles/controller-recovery-process

Cheers
Cindy

We've seen a number of situations where customers think they have an A40, but infact they have an A41 controller. A40 is supported, but A41 is not.

To check which TCM you have you'd need to...

I'm not actually sure you could program V2.07.140 firmware into the V2 with a 2.04.10 bootblock - I'd suggest that step would fail. It's Saturday here so I can't elevate your support request until...

Can you please post the firmware version you are trying to program again - the version number does not look right.

The public release version is V2.07.140 (May 26, 2019)
The beta release version...

AutoCal can read and flash your new project without any issue, however AutoCal cannot sign new tunes (ie. tunes you write) for flashing. That permission is only available for FlashScan devices.
...

You cannot read any CME controller. The factory read restriction prevents reading 2010+ Cummins (CMD, CME and CMF) controllers. Users must obtain a base file to tune with.

Please refer to this...

Try this https://support.efilive.com/kb_article.php?ref=6659-YAHB-3781


Sent from my iPad using Tapatalk

Email support@efilive.com with the license number of the device and we will see if we can identify the tuner.


Sent from my iPad using Tapatalk

EFILive has supported this platform for supported for 7 years and we've only had 3 requests (all in this thread), I cannot prioritise the developers time to attend to mapping these for 44 operating...

The developer picked 5 key operating systems and added the tables for testing. If you have a specific OS you require these on please let me know.

Save the files into the C:\Program Files...

You won't be able to determine the tuner without the previous owner telling you who tuned it or without EFILive hardware.

The switch positions and each positions purpose is tuner dependent. What...

EFILive Licenses to ECM serial number. When the ECM is switched out, a new license is needed. If the ECM is replaced at the request of an EFILive support investigation, a VIN license will be issued...

Just to update this thread. The Custom Operating Systems restrictions list documented in the Problems Reading a controller help document do not list E98. ...

$0536 means the tune file was not saved for use with AutoCal - although your AutoCal is linked to your Tuners' FlashScan, the tune file also needs to contain his FlashScan serial to give the AutoCal...

No worries Tom. Totally your call. Happy to arrange a refund if we can reference it back to EFILive order numbers...

Cheers
Cindy