Search:

Type: Posts; User: RamAir; Keyword(s):

Search: Search took 0.00 seconds.

  1. That is what I thought, but in your documentation...

    That is what I thought, but in your documentation (pg 17 of COS using 2/3 bar) it indicates "several other STFT values may require adjustment:" {B4108} STFT Idle Disable. This value would either be...
  2. Ok - another question: why would you want to SFTF...

    Ok - another question: why would you want to SFTF Idle Disable (B4108)? Don't you want SFTF since the O2s are giving feedback?
  3. LS1b semi-closed loop operation question (B3647)

    EFILive has the LS1b has the B3647 Commanded Fuel/RPM,which when set to 14.63, will cause the ECU to go into a semi-closed loop state using the O2 sensors to keep idle and part throttle AFR @ 14.63....
  4. Since I can't update my existing software, my...

    Since I can't update my existing software, my only option is to download. Will downloading delete any saved tunes in the bin folder? I am also assuming all license info is stored in the V2 interface...
  5. Yes, you are correct, I am using B3647 table...

    Yes, you are correct, I am using B3647 table which is the gasoline table. I think that if I specify an AFR of say 14.0 in table b3647 then the computer looks at what values are stored in the main VE...
  6. B3649 is a custom operating system that I am...

    B3649 is a custom operating system that I am using in a GM 2002 Trans Am. It is shown on page 17 of the EFILive Custom OS upgrade tutorial documentation for LS1.
  7. How does table B3649 work if 14.63 is not used

    Table B3649 is a semi-open loop table that uses the O2 sensors to update the AFR only WHEN 14.63 AFR is inputted into the table. If you put any other value into the table it indicates that the PCM...
  8. Replies
    10
    Views
    6,458

    Can you tell me how you got it to work? I have...

    Can you tell me how you got it to work? I have the AEM 30-4100 and can't get it to work.
  9. Replies
    7
    Views
    9,149

    I have the AEM 30-4100 Gauge type UEGO controller...

    I have the AEM 30-4100 Gauge type UEGO controller which uses a Bosch LSU4.2 UEGO Sensor (controller is in the gauge)
  10. Replies
    7
    Views
    9,149

    I verified that the file indeed exists in the...

    I verified that the file indeed exists in the Config folder. When I start V2, I still get "Wideband not found". I also verified that I am getting a voltage signal from the AEM Wideband serial output...
  11. Replies
    7
    Views
    9,149

    When I click on Save, it goes to EFILive/Config....

    When I click on Save, it goes to EFILive/Config. Should i save the file "Settings.dat" there? Also, should the file name be "settings.dat"? By navigating down on the V2, do you mean Scan tool/data...
  12. Replies
    7
    Views
    9,149

    AEM Wideband Serial Hook-up -

    I have an AEM Wideband 02 sensor that I am trying to connect to the serial port on the V2. I have read all the forums on what to hook-up (pin 2 is the blue wire fro receiving data as welol as pin 5...
  13. Replies
    10
    Views
    6,458

    Did you ever get yours to work? I keep getting...

    Did you ever get yours to work? I keep getting "wideband not found".
  14. Replies
    5
    Views
    4,689

    Greg, How will I know if the MAF is accurate...

    Greg,

    How will I know if the MAF is accurate to around the 70lb/min mass airflow value that I will need for the blower? Is the loss in resolution stemming from the scaling percentage employed to...
  15. Replies
    5
    Views
    4,689

    Can EFILive change the MAF hard limit of 512g/s...

    Can EFILive change the MAF hard limit of 512g/s in the PCM? This would really be great because for those cars that have a blower, we would not have to try to scale everything or go to speed density.
  16. Replies
    5
    Views
    4,689

    Scaling MAF for Supercharged GM LS1

    Has anyone tried to scale the MAF to be used in a supercharged application on a LS1 (with 12psi boost it does peg it early)? I would really like to increase the limit of 512g/sec but I think it is a...
  17. Idle A/F ratio rich, OK when put in drive, LS1 Trans AM

    I have a 2002 Trans AM, speed density tune, with 02 enabled (maf turned off). When the car is idling in park, closed loop, the A/F ratio is around 12.6 but as soon as I put the car in gear, the A/F...
  18. OK, so if I enable the MAF again, then the O2 &...

    OK, so if I enable the MAF again, then the O2 & MAF will enable good AFR during my normal driving. When I get into the throttle, and the MAF gets pegged, then the PE table takes over (Boost VE table)...
  19. So when the car is running in closed loop, where...

    So when the car is running in closed loop, where do the LTFT values get stored (I assume that the PE table never gets overwritten). How does OLFA (Open Loop Fuel Air - I assume) When the engines...
  20. Tuning LS1 Superchared 02 TA with speed density and o2

    I have an supercharged 02 Trans Am that is speed density tuned with a 2 bar MAP. I would like to be able to use the 02 sensors in closed loop with the tune. How is this accomplished? Do you activate...
  21. Replies
    126
    Views
    175,450

    Sticky: I tried as you suggested and it indicated that I...

    I tried as you suggested and it indicated that I already had the most recent version installed on my system. Any other ideas?
  22. Replies
    126
    Views
    175,450

    Sticky: Getting version 7.5 to read PCM

    I just got your V2 tuning tool and tried to read my PCM ('02 Trans Am) using the version 7.5 software. The unit indicated that this version is not supported. I tried with the version 8 software and...
Results 1 to 22 of 22