Search:

Type: Posts; User: ScarabEpic22; Keyword(s):

Page 1 of 20 1 2 3 4

Search: Search took 0.03 seconds.

  1. Replies
    10
    Views
    1,675

    Correct, you need a FlashScan V2 to read/write...

    Correct, you need a FlashScan V2 to read/write your E38.

    Yes, a new FlashScan V2 unit is $899 with 2 VIN licenses and 1 tuning option (either GM or Cummins, you need GM). That will let you...
  2. Replies
    3
    Views
    280

    If you just want to buy and flash tunes from a...

    If you just want to buy and flash tunes from a tuning company (i.e. CTT), I would suggest purchasing your AutoCal directly from them along with the tunes. You may need a different CSP switch as well,...
  3. Replies
    2
    Views
    382

    You can try, but the likelihood is the tune file...

    You can try, but the likelihood is the tune file is set to read-only so even with the file, it will not open and display any tune/calibration information. Connect AC to PC, go in like you'd load a...
  4. Replies
    2
    Views
    200

    Hey Lonnon, just replied to your email as well. ...

    Hey Lonnon, just replied to your email as well.

    Transmission and shift pressures are fairly subjective and you'll want to play around with them a bit. The I6 has lots of TM that can be removed,...
  5. Replies
    3
    Views
    472

    Awesome, can't wait to get used to working with...

    Awesome, can't wait to get used to working with it!
  6. Replies
    4
    Views
    103

    Yes, just install 3 Bar MAP and change the MAP...

    Yes, just install 3 Bar MAP and change the MAP sensor settings to match. Then tune VVE and/or MAF to suit. No COS needed nor will there likely be one for your vehicle. Look at swingtan's VVE tuning...
  7. Replies
    4
    Views
    103

    Need to tune the MAF and/or VVE tables most...

    Need to tune the MAF and/or VVE tables most likely, showing that lean on LTFTs is why the code is being set. No "master" table, you'll need to tune the airflow. If you're planning to do all of those...
  8. You need to make sure to smooth out any spikes, I...

    You need to make sure to smooth out any spikes, I would knock that massive random spike down as it's not accurate. Use ~50-100 cell hits before you start using your log data and make sure you have...
  9. You need to pick what O2s to run, and use the...

    You need to pick what O2s to run, and use the engine segment from the matching vehicle. The LM7 I don't think was mated to the 5spd, but there are 5spd 4.8L Silverado out there.
    You're going to need...
  10. Replies
    2
    Views
    777

    You will need to purchase the Cummins Tuning...

    You will need to purchase the Cummins Tuning Option for $450 and add it to your existing V2, then you will be able to license and tune your Cummins. It's a similar process to purchasing a new VIN...
  11. Replies
    5
    Views
    296

    Connect to the ECM and open up the DVT tab to see...

    Connect to the ECM and open up the DVT tab to see if it's an option. That doc is super outdated.
  12. MPVI2 is a HPTuners product, not EFILive, so...

    MPVI2 is a HPTuners product, not EFILive, so you'd have to ask on that forum.

    I tried reading an Isuzu Amigo (basically a shortened Trooper) and it isn't a supported PCM by EFILive. You'll need to...
  13. Replies
    2
    Views
    253

    Should be ok, I know someone else was fighting...

    Should be ok, I know someone else was fighting the approved driver process so you may have to disable that in Vista.
  14. Replies
    1
    Views
    565

    I dont think it's ever been planned to be...

    I dont think it's ever been planned to be supported? Probably have to buy MEFIBurn or MEFI Pro to mess with them.
  15. Replies
    2
    Views
    357

    I'm not as familiar with Duramax stuff, but for...

    I'm not as familiar with Duramax stuff, but for GM gas stuff of that era, it's better to have a fresh flash with the correct segments for your vehicle from Tis2Web. You would probably be ok finding a...
  16. Replies
    3
    Views
    237

    Please report using desktop or mobile instead of...

    Please report using desktop or mobile instead of Tapatalk, there is a known issue where Tapatalk cuts off most of the post.
  17. Replies
    1
    Views
    1,024

    A VIN license contains 1 PCM/ECM and 1 TCM/BCM...

    A VIN license contains 1 PCM/ECM and 1 TCM/BCM license in the VIN license. Your FlashScan will come with 2 VIN licenses, so you can tune 2 PCM/ECMs and 2 TCM/BCMs. Depending on what year vehicle will...
  18. Replies
    6
    Views
    914

    Your post was cut off, I'm assuming you posted...

    Your post was cut off, I'm assuming you posted using Tapatalk (known bug with the app).

    EFILive licensing works like this for FlashScan V2:
    1. You need a tuning license (GM or Cummins) to...
  19. Replies
    6
    Views
    469

    Yes all of that will need to be adjusted, but...

    Yes all of that will need to be adjusted, but you'll have to tune that and/or copy stuff from a SBC-based tune (i.e. Express Van). More important is getting the 24x setup so you can actually crank...
  20. Connect to it as a 98-00 Black box or try the LS1...

    Connect to it as a 98-00 Black box or try the LS1 PCMs. Should be a generic PID so just need to get the V2 connected.
  21. Replies
    6
    Views
    469

    And now that I said that, Express Van wouldnt...

    And now that I said that, Express Van wouldnt work with 24x/1x setup. You'll need to use a regular LS1/LQ4 base tune as that'll be 24x/1x and individual coils. Not really a big difference between...
  22. Replies
    6
    Views
    469

    02 Express Van or 02 Fullsize OBS 5.7 SBC....

    02 Express Van or 02 Fullsize OBS 5.7 SBC. Express Van is going to be the easiest to find!
  23. Replies
    11
    Views
    741

    Interesting, maybe GM just kept using this as a...

    Interesting, maybe GM just kept using this as a carryover from 02 for the Mexico trucks? That's the normal 8.1 OS from 02, interesting to hear there are changes compared to the 02 MY version.

    I...
  24. Glad you got it sorted out and thanks for...

    Glad you got it sorted out and thanks for reporting back on the fix!
  25. You can't setup all of the necessary parameters...

    You can't setup all of the necessary parameters in EFILive to enable efans on a Gen IV+ controller. If the vehicle did not come originally with efans, you'll need to obtain a patched file with the...
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4