Search:

Does your scan tool show drive when the shifter is in the drive position? Thats where I left off on my project. I just took the switch off or the side if the trans and put it in the correct...

Part two!! I have an 04 SSR that started with a 5.3 and 4l60e. WE had a 382 the truck ran low 12s at 110 mph but never had a nice idle and would foul plugs if we didnt clear it out before turning it...

I got the car with no motor and the engine and trans was out of a wrecked GTO so I never saws the GTO. The customer picked the car up yesturday and was very happy with the performance of the car. I...

In order for the t/b to work correct the prndl switch has to be in park position I did not know if that effected any of the timing tables or any other tables for that matter.

Erik , thanks fo your help!! Last night I found that for some reason the prndl switch on the selector shaft of the trans is showing p in park r in reverse 6 in neutral and n in any of the drive gears...

I just unplugged the tcm and tried to free rev the car in park and the throttle is opening slow as it does when the car is in gear, plugged it back in and in park the revs to the moon quick. So it...

IS there ant way to change the tune so the t/b opens when the throttle pedel is pressed and disable any fail safes? I know I'm grasping but I need to get his car done and dont know where to go from...

And the trans tune if it helps.

Here is the engine tune.

Erik, that complete table in all of the gears are maxed at 8192. I have the shop version of EFI I will try to post the engine and trans tune in a few minutes.

I have been reading this forum for a while and it's time to ask for help.
We installed an LS2 w 4L60E from a 05 GTO in a 91 Z28. We had speartech do the harness for the conversion and it's a stock...