Search:

Type: Posts; User: gm22j; Keyword(s):

Search: Search took 0.00 seconds.

  1. Need a tune looked over, 2nd time damaging this specific 0411 w/ ETC

    A little background, I helped a friend swap a 5.3/4L60e with ETC into his c10 truck. The running gear came from a 03 Suburban that was on ebay, including throttle pedal, throttle body and module. ...
  2. I was able to get it sorted out this morning. ...

    I was able to get it sorted out this morning. When I wired the new pigtail for the 3 bar map, my Snap-On vantage had the wires on the outside switched which threw me. I found something on LS1Tech...
  3. 3Bar for 03 Suburban file, MAP scanner values are stuck at 105 kpa

    Engine is a Gen 3 5.3 w/ ETC, stock computer, LSA blower and btr cam using stock style lsa rail and injectors, ZL1 lid with OE 3 bar MAP and IAT sensors in the lid. I flashed 03150003 for 3 bar SD...
  4. Good info. Thanks!

    Good info. Thanks!
  5. I must have misread something and worked myself...

    I must have misread something and worked myself in a circle somewhere. I started over from scratch and left pe table alone. Did end up finding a problem with MAF. Replaced maf, did a recal, and...
  6. PE mode was set to "1" for entire range, and the...

    PE mode was set to "1" for entire range, and the richest it's commanded in open loop is .95 from 140*f and warmer. Truck was warmed up.
  7. stock 05 5.3 - why is commanded/delivered fuel so far off? AutoVE

    Working with a stock 5.3 in an 05 Silverado with K&N and magnaflow muffler, otherwise bone stock. 87 octane in PA. Drove with Zeitronix wideband via serial and saw 10.5 afr delivered while trying...
Results 1 to 7 of 7