Search:

Sub


Sent from my iPad using Tapatalk

Got everything straightened out. I had limited the power a bunch on dsp2 for when I valet park my truck. The cruise control would over ride the way I limited it and make full power.


Sent from my...

I'm pulling an RV on vacation on dsp2 with the cruse on I can make 32psi of boost. However with the cruse off I'm only making 15psi. Egts are low so something is causing it to pull fuel. Dsp3...

Hi Paul,
Maybe Im not doing something right, but I can change the units in the tuning tool via the edit-config-all-imperial/metric. It make no difference which units all the other tables in the tune...

Bump anyone got a suggestion? I don

Here is the pid info
https://uploads.tapatalk-cdn.com/20180318/27f6fabfc2d7f812061e1c169279a652.jpg

Selected log data...

While selecting logged data and reviewing it in the tune table B0720 main injection pulse the MPa columns doesn't track right. It hasn't worked for a long time for me. I just updated everything to...

I'm working out of town and don't have access to my V2,but here is my option.txt. I didn't notice anything being out of place like a red bar graph.

I played with shift points and didn't gain anything. The ECM is where all the improvements seem to be.

I've had an intermediate problem while changing my PIDs. After doing so sometimes I'm unable to select PIDs or log. If I hit enter to select PIDs ETC the screen will flash but it won't do anything....

I use to log a few TCM pids while logging the ECM via the V2 before updates. Now it won't let me select them both in the Scan and Tune under just the ECM. I don't see a way to log both ECM and TCM at...

Never mind after restarting the computer it worked fine. We are out of town and I just had to try one new tune right before we left to go home...

I was flashing my truck when it failed after trying to partial reflash the ECM and after aborting the attempt to restore failed. Now the truck does nothing when I try to start it. My concern is that...

Why is that to do any updates to the Options file?

That is what I was looking for thank you

Well it works ok now. Not real sure how I fixed it but it works for now.

The only question I have at this point is how do I get other controllers in my Options file? I have deleted everything but...

Sorry I was pretty irritated last night. I always have trouble doing updates when it gets to this point.
Yes I updated to the 2.07.01, 2.07.09, and 7.5.6 build 157. I was getting the $0311 when I...

The last update I did was probably a little over a year ago. After doing the new updates and installing the bootblock and firmware, I get a $0311 Error on the V2, so I thought I needed to reconfigure...

No kidding

I had to fine tune my speedo too using GPS

I can't say that I did neither, but that was a while ago. I don't think I changed much other then the speedo and EGR until after I had the plate and transgo though.

Stock from 1600RPMs up mine are set to 2/1 humm well I'll try lowering them a little from idle to 1200 too.

Ya I think that I'm going take that route too. I screw up in my last posts. The problem is with the B2228 the vane table so you might be right about B2231 and B2232 playing a part. So when you say...

Well I put the vane table back to stock and it was still acting up this evening. And my ECT got to at least 192* and the boost never dropped back down that I saw. This morning the boost was high but...

I forgot about those but I don't see how it could be them. I'm seeing the issue while driving running around town and hwy at up to 40mm3. And the fact that my boost changed 5psi and the only thing...