What year gmt 360? That's a trailblazer/envoy/Rainer/97x, etc I can do just about anything with a e67, I can enable class 2.
Type: Posts; User: 04colyZQ8; Keyword(s):
What year gmt 360? That's a trailblazer/envoy/Rainer/97x, etc I can do just about anything with a e67, I can enable class 2.
[QUOTE=griffincox;244149]Any more info on how to enable Class 2 on a E67 that doesn
Gm connect and cruise has a tap shift option for 8speed auto I have the trans and engine calibrations and engine harness diagrams. But not the transmission harness diagram? Anyone know what pin the...
Tps 1 and 2, and sae and commanded all show 33% plus the blade seems like it's at 33%. Looking at the tb. Pedal is showing 99% pressed all the way to the floor
You used to be able to bench test the throttle body and pedal on the e40, e38, e67s. Can you do the same with the l86, lt1, lt4, l83 e92 files? I'm not getting any throttle body or pedal codes? No...
Can't find a gmpp tune file anywhere! For the e92 pcm.
2016 caddy 6.2l l86, e92 pcm. Stock throttle body, different pedal, bench testing the pedal, I don't have the stock pedal to test. I had to hook up a tcm to stop from going into limp mode, and a...
Anyway to make a e92 cruise work stand alone? Everyone I looked at has the cruise going through the bcm? Same as tapshift.
So the hardware isn't in the controller?
What would happen if I connected the can from the e92 to a e67, would the class 2 on the e67, then output the speedo, rpm and temp via class 2 from the...
Can any of the E92 or SIDI computers talk class 2 data? I'd like to run one of these in a older Colorado canyon, with class 2 gauges.
I'm prob going to use a vette os 6l90e? for tap shift, will that be an issue running a 6l80e from a 2010 Silverado? What's the difference between the two? I'll also be using newer vette os with a...
I'm trying to get a 6 speed auto to work in a Colorado canyon gen 1. With 58x gen iv motor.
Stock I believe is Prndm 21 which is actually prnd6 d2 d1
I only get the display to read prnd3 1 or...
Your speedo in your Colorado must not work? With the 03 Tahoe? Just not wanting others to go the same route as you, and then find out stuff doesn't work.
Why do you have a ls3 convertor box?...
It's the last calc pid I posted should still be the same just lost power so I can't post it! Ok I'll make those changes it's not idling that bad after I subtracted 3.5 from the base running air flow,...
Update 3.5 worked better, so I just subtracted 3.5 from the stock base idle air flow table, is this what your supposed to do? It seems to have a start-up flare problem still, but quickly calms down,...
Here is my log, and pids that match the log
20954
20955
Fixed the idle took 3.5 out of the entire base running airflow table
Fixed I guess? Subtracted 5 from the entire b1829 base running airflow table, no more hanging throttle going to try 3 or 4, as it's drops quick clutch in, now
Yes hopefully later but the truck isn't driveable I put the ls2 silverblade tb on it and is it won't idle you touch the gas and the rpm stays up around 1500-2000,and won't come down causing it to...
I have a 07 5.3L with Ls2 intake and 88mm truck tb, with 07 CTS-v E67 Tune, I had to set P1516, and P2101 to 80% to get the reduced power to go away, I did a basic dirty VE, and maf tune, and the...
my custom map for maf, hi, lo created from hp tuners editor copied col axis, and by hand removed the extra comma on each one..fingers tired now lol:( will these work?
20933
20934
Does anyone have a E67/E38 maf hi lo, map? I cant copy the lables from the editor to th scanner
here is a screen shot
Ok Joe how do these look? I'm getting a few red x through some pids, is that map correct?
whats the difference between the last two calc_pids you sent? Looks good to me, except:
*CLC-00-080
V 0.0 5.0 .2 "{GM.ACP}"
AFR 9.0 16.0 ...