gotcha thank you
Type: Posts; User: calif0rnia; Keyword(s):
gotcha thank you
yes. however this topic is no longer being pursued, my tuner is gonna use hptuner to do my truck
but thank you for your time and assistance
i dont know, ill have to look. i use v8 for scanning and v7.5 for tuning
it doesnt have gm.dyncylair. it has dyncylair, cylair, cylair_m
so which pid do i use for the scan log? the pid list shows dyncylair but not dyncylair_dma
which PID is used by the pcm for the spark maps? dyncylair or cylair? this is for a 2003 silverado 4.3L
ls1b controller.
remember that the dist shaft and the rotor plate are 2 separate pieces when they are first made. the shaft has to orientated correctly with the rotor plate when they are pressed together during...
well i figured out the issue, you were close in ur response. apparently the maker of the aftermarket distributor fudged when they pressed the rotor plate onto the shaft. and by rotor plate, im...
2003 silverado 1500 2wd 4.3L 5spd manual
i recently had the engine rebuilt past factory specs. Its bored .030 over, shaved deck, compression 10:1, lager cam .500 lift, heads ported/polished,...
ok well i gusss this thread can be closed. i ended up making a bench harness and was able to connect to the computer and it identified as the LS1B thank you to those who helped
okie dokie ty very much i tried auto detect but i get the $0101 error code right now my engine is in the shop being rebuilt, so i was thinking about making a bench harness as per efi...
from my understanding, it is the P59 PCM is this correct??
if so, then which pcm do i select in the efi live v8 software tuning section. the only option that is close is the p04b "98-04 v6"
i need help identifying which controller i have in my 2003 silverado 1500 2wd 4.3L serv# 12581565 hdw# 12575502