Hey Guys,
Anybody got a T76 connector pinout? Been searching all over and can't seem to find one. Thanks in advance!
Type: Posts; User: mbsurfersc; Keyword(s):
Hey Guys,
Anybody got a T76 connector pinout? Been searching all over and can't seem to find one. Thanks in advance!
Are you guys disabling the Rev Limit Accel Modifier (B5208)? This tends to play into all of this when the car is making some good power.
Is there a way to search through tune files by OS. If I remember correctly, at one time I had stumbled over a software that would do something similar by VIN, i Imay be wrong though. For instance,...
Ended up being a bad Oil Pressure Sensor on a car with less than 2000 miles. Thanks for the advice though!
I saw that and in a comparison of the two I couldn't rule out what was different because of the first person that messed with it, or because of the auto to manual difference. Thanks though.
Does anybody have a stock 2005 LS2 Automatic Vette Calibration? The ECM is on 12598983 firmware.
Customer brought me a car that the tune has been run through a lot and I would like to start fresh....
Thank you.
Hey Guys,
I've been working on the CTS V here and there and recently did an update that totally messed up the idle.
When i opened the file after the update there was an "out of range" error...
disconnect the boost control solenoid on the front left side of the blower. its not in the tune.
Well after battling this thing for a while yesterday, bombing one E38, and banging our heads against the wall, we came to the conclusion of running a standalone transmission controller. I purchased a...
I could see where the ground things may be a problem, but this is a 2009 Escalade were talking about. Everything in the engine harness is 100 percent factory including the E38. The only difference is...
After going on there website it realized i had the connector on my e67 harness lol
so i flashed the tcm with the tune you provided taz and put it all back in the car.
Still the same thing......
Anybody know where i can get a bench harness for the t42?
The t42 does communicate via can. The harness have is an adaptor deal that splices into the e38 harness. I have a feeling that the splices are in the wrong part of the can bus communication. I'm...
Taz & gmh308,
Both of those things make very logical sense.
gmh308,
I can talk to the tcm through the obd port either. The only thing is that i do not have a bench harness for that...
Sorry to be unclear...
When the key is turned on, everything powers up. When you turn the key to start, the dash goes dark as though it was trying to start. The best way I can describe it is that...
correcting myself :)
Still no dice. Seems as though the truck wont start because it doesnt think its in neutral or park. Im getting pretty frusterated with this thing. Anybody have any input on the gear position thing.
another thought...
should there be any need for an external gear position switch for the different transmission.
Yes it is the ECM that came in the truck with the factory tune on it, adjusted for injectors,motor,ect ect
All of the vats are disabled and have been full flashed into it.
The tranny config...
Not sure why i cant receive them. If you would like please email me at zwhill@hotmail.com
9172
Couple of wierd things going on here.
1. The ecm will not talk to the v2 through the obd port. When i put it on my bench harness though everything is seemless.
2. Also when I turn...
No dice... i cant seem to get anything out of the ecm. Any chance i could get that file out of the truck that you have taz? Any help is much appreciated. Thanks!
yea def, i will try it hopefully tomorrow and I'll let you know, thanks again for the help!!!
I really appreciate the help guys, ill let you know how it turns out.
Anyone know where I can get the Silverado file to mate up with the T42 file from Taz?
Any help is greatly appreciated