I updated my previous post. The correct start address is 1B6DEE
Type: Posts; User: koolky; Keyword(s):
I updated my previous post. The correct start address is 1B6DEE
[B3499]
; Description
; --------------------------------------------------------------------------------------------------
DESC.001 = MAP Sensor Scaling
DESC.002 =
DESC.003 =...
I'm hoping for some feedback on these two .cax file that I made a while ago. I think I am still missing some fan parameters that would allow the option to convert to discrete fans versus having to do...
I've had the link bookmarked for years and it's not working for me either. Dropbox says item deleted...
Does your pedal match your OS?
23251
Looks like the ECM might not be getting P/N input (log show inactive). You could log RVSDH to see if 'Trans Range Not Park'.
Yes. Look at B0921.
Log ENGR - Power mode / starter status. Even if you made a mistake doing the VATS patch I believe the car should still crank, fire and stall a few seconds later. My guess would be a configuration...
The 08 Grand Prix runs an E67 ECM with OS 12618164. I'm not sure if any of the platforms that run an E67 and have the correct communication options to work with the G8 modules.
OS 6128 address: 1E24E8
Let me know if you have any luck. This table is just above B0701. Auto, manual and Kodiak's all have different values.
I've had this mapped for a a while but never tried it. Use at your own risk. OS 12632483 / 512632483.
[1E25A8]
; Description
DESC.001 = Not confirmed
DESC.002 = ...
The VE table in the last file I posted is a lot different when comparing it to a 2002 GMT400. I can confirm that the truck which that tune came from did not have a propane conversion.
I'll keep looking for some 2002 VIN's and post them up if I find any. I did manage to find the 2006 GMT400 C3500HD 8.1L Manual that I was looking for. I was expecting it to run a 1MB ECM but it is...
It'd be nice to have some people in Mexico reporting back VIN's. I've come across a few 2006 GMT400 C3500HD 8.1L Manual online but no VIN listed. Also, It seems that all the L31 GMT800's that I find...
Not sure if this will work but here is a stock LSA with the transmission type configured for 4L60E.
22740
Engine Oil Pressure:
After dozens of hours I have found the address that defines oil pressure switch vs sensor. It is really only useful for people doing 4.2L LL8 swaps who want to log EOP and...
I thought I'd share these 2 unusual tune files I have. Both are from Mexico market GMT800 (99-06 & 07 Classic) Silverado 3500’s that came with 5.7L L31 CPI engines and 5 speed manual transmissions. ...
Even with B3801 and B4108 set to disable?
As for the injector data, I assume they are either 42 or 43 lbs/hr at 58psi (based on what information I can find online). This lines up with the data...
I'm working on tuning a supercharged LS2 and hope you guys can help me with a few things. I've done some NA tuning before but this is the first boosted gas engine I've worked on. The engine specs...
LS-SWAPPER, try this file. I made the changes to your file from post #42. It's not segment swapped.
22287
You have to add it to the pid list first. (Selected pids)
Is there a pdf tutorial that I'm missing? The only way I can think to integrate the filter pids into the calc pid is to write the code as show here:
22242
I've set the filter pids so that they...
Got it now. I didn't realize that I had to include them in the pid selection in order to write them into my custom pid code.
How do I include a filter in a custom pid code? With the filter set as 'boolean' they don't list as pid's that can be included.