Search:

On a 99 C5 it can be done. I used it with an ITP manifold, and it worked without problems.

Till

There is also an adapter for that, and I can't think of the name now.

On the passenger side, under the dash, there is the BCM module. To the left of the BCM are two connectors. In each, there is...

The VE table is calibrated pretty well, at least for low rpm and load. The problem is not stalling or flaring. Befor the idle is learned, the PCM will open the throttle to some value. It might be the...

I didn't know that. I would have expected a check sum error would be reported immediately. Maybe it doesn't like something about my ETC tables, and there is a counter for the number of times it...

Maybe the problem is related to this:


This wouldn't really explain why the PCM can't be rewritten though, or does it?

Till

Hi,

as I mentioned in a previous thread ( http://www.efilive.com/forum/viewtopic.php?t=1712 ), I am installing an individual throttle body manifold in a C5 corvette. And I keep running into...

I found the problem. The TPS voltage with the throttle closed is 0.1V. If this voltage is lower than 0.13V, the codes come up.
Tomorrow we will turn turn the TPS sensor a little bit, to get a base...

The good news: The Hurricane fits into the C5 corvette.

The bad news: The air-box doesn't.

We will figure something out for the air-box or filter. I will try a filter-box for now, and see how I...

You can see where the throttle cable would attached. The corvette has an electronic throttle control, and the throttle motor is attached from underneith. The TPS gets bolted to the first throttle...

And another one:

here you go:

I just got back from the shop. We mostly checked if the manifold is even going to fit, and it's going to be close. And I need a fuel pressure regulator.

This manifold works with the electronic...

This will be the first (or one of the first) units to go into a corvette. I just took the plunge, I will see how well it works. I have a very mild cam now, so the I won't gain too much with the...

Here is the link to the manufacturer: http://www.harrop.com.au

Till

and another one:

Here is a picture of the manifold:

I am not sure this really belongs here ... anyway:

I just got an individual throttle body manifold for my C5 corvette.

For the SD tuning I will update the OS from 99 to 2001 or 2002. I have no...