Ill try and return B4501 and 02 to my stock parameters. I can also try and return the start up and decay to stock too. I made a little progress, I removed 10% from my Desired Idle Airflow and it...
Type: Posts; User: Slow73; Keyword(s):
Ill try and return B4501 and 02 to my stock parameters. I can also try and return the start up and decay to stock too. I made a little progress, I removed 10% from my Desired Idle Airflow and it...
Wow....b4314 looks way outta whack compared to my stock file......I cant even explain how that happened! Do you think I should try my stock values or something different?
As for vehicle speed, it a ls1 swap with a turbo 350 trans, no VSS. As with all of my other car with no vss, its tricky coming to a stop but driving around and letting off the gas has always been...
9108
Hope I attached my tune right? This is an LS1 transplant into a Nova, stock longblock, FAST 90/90 and the big Trex cam. Car idles good but when revved up off of idle, it hangs for maybe 6...
It is disabled....thanks Joe...ill give that a try.
I didnt read all of the pages as his 1st paragraph mentions tuning via the MAF. Im running OLSD.
Trying to tune my WOT AFR on a race car....im commanding 12.80 and seeing AFRs in the low 13s throughout my run. Is there an formula I can use to figure out how much to richen my VE table to get to...
Its V1. I can sure try to do that for ya!
Not too sure if this is the right spot to post this but here is my issue. I bought a used V1 to tune my LS1 swap project. I am able to read my PCM and also flash it via the Tune tool.....no issues at...
Thanks,its raining here today but ill give it a try. Can you share some input to a noob like myself how you came to this conclusion? I really appreciate it!
Im trying to dial in my WOT AFR. Running an 02 OS, OLSD tune. Bacsically a bracket race car but driven on the street once in a while. Drives great, idles perfect. IM commanding mid 12s AFR at wot but...
Thanks for the reply......I didnt add any guages...can you go more into this as im a newbie?!?! How do I add a guage for my LC1? Thanks.
Hi,
Im trying to do some AutoVE logging and im having a problem. Selected the correct PIDS and set up the Map from the tutorial. Im using an LC1 and I believe its set up correctly. Heres my...
Hmmm, Im sure that the 1st thing that I did was click the "use air-fuel ratio" tab.....Ill have to double check.
Im trying to input the values from the download section into my LC1 to program it to work with efilive. Im using LMprogrammer 3.22 and on the site it shows version 3.06. Heres my problem.......I...
Thanks for the replies. What is the maximum TPS voltage you can have for idle?
Working on my cammed LS1 motor. My IAC count when warm is in the 120s. The car has a big cam (TRex) and I finally got it to idle good. There is no hole in the TB but I did adjust the blade a...
Now when I try to connect to vehicle I keep getting an Error....no interface cable connected? What am I doing wrong?
Thanks for the replies. My problem is when I try to set up a new map for this, it says RAFIG on the top of the map. Im trying to see my ECTs and RPMs. On the sides of the map instead of values....all...
Sorry if this is a dumb question and forgive me please! Im new to Efilive and tuning in general. I did an LS1 swap into my Nova. I finally got it up and running and it finally holds an idle (not a...
Im trying to flash my PCM for the 1st time. Read it ok...opened the file...did what I had to do....trying to flash it and its telling me
Flashscan cable isnt licensed to reflash my PCM? It must be...
Thanks for the reply but know when I plug into my USB, nothing happens. I dont even get a prompt to do so and the box itself isnt lit up or anything?
Sorry as im sure this isnt the right section! I bought a used V1 from Ls1tech and im trying to install it on my computer. I download the latest version from the site with no problems. At 1st when I...
Im a EFIlive newbie here so bear with me! I just picked up a used V1 and im awaiting its arrival...should be here early next week. In the mean time im trying to read up on what to do but its a bit...