Search:

tHREAD WAS A BIG HELP. dOWNLOADED LATEST v7.5 aND v8. gOT THE $0194 ERROR WITH THE FIRMWARE UPDATE. fORMATTED THE sd CARD AND HAD TO REBOOT v2 AND cLOSE AND RESTART v* BUT ALL IS GOOD. fILES WERE...

Yes, the Edelbrock was letting way to much airflow through!! I cleaned the rest up with using the MAFFEQ as you suggested. Thanks joecar!!
:cheers: joel

Follow up. :)

Hooked up the Corvette rear O2s - no help!! Trims were still +25 at idle. Trashed the Edelbrock 90mm TB and replaced with a new, stock 2000 Camaro TB. The new TB did it!!!! Trims...

Hmmm....I need to check this on the LS6 setup - old school analog gauges. :) Thanks!!! :cheers:

ummmm oops Corvette engine, Camaro PCM.

Thanks, joecar! I'll try the corvette rear sensors as they are supposedly less senstive due to greater heating.

:cheers:
joel

I looked at the attached scan https://forum.efilive.com/attachment.php?attachmentid=17490&d=1410785456 and the mVs stay in 30-50 range - when I pulled the booster and plugged it at the intake. So,...

Yes, I checked this. Actually, it's on the early part of the unplugged MAF scan. I think I'll recheck it and scan stfts and ltfts at the same time maybe I didnt wait long enough...can't hurt!! :) We...

Hey joecar - I added 25% fuel at the VE table, idle cells and it didn't change it a bit. I'll try the MAF.


Tb - no leaks. I even double checked it with an ultrasonic leak detector.

Thanks!!

Stock LS6 bolted to 4L60e. 90 mm Edelbrock throttle body (came with the wiring harness/PCM setup). New MAP and MAF. New Vette front O2s. Thoroughly checked for vacuum leaks - all corrected. :) At and...

I did an uninstall, fresh install 7.5.7 262. Read the pcm. Scanned and scanner says it's 2 different vehicles. Read PCM is a 2000 Corvette and scanned is a 2002 Camaro. I would guess this has to do...

Hey joecar! It's good to be back ........I need to knock some cobwebs from my brain. :)

FlashScan V2
V7.5.7 Build 262

Hi all!! It's been a long time since I've used EFILIVE. Many wonderful changes!! Getting back to a couple projects. :D


We bought this harness and PCM From PSI Conversion (PSIConversion.com). It...

I agree with Steve on this one. :D This thread needs to be stickied (stuck? :) ) in more than a single subforum. There is an amazing amount of info here - thanks, joecar!! You guys need to broaden...

Very sad.
Thoughts and prayers for him and his family. God Bless.

This ^^^ and the following post, by joecar, should be a sticky - if it isn't already. Very nice, succinct, summary. Just my .02.

The suggested/related thread feature sure is nice (I feel like a...

These injectors are used in the ASA tune. The GM tables are available in the ASA tun...offsets etc.
There are both a 1998 ASA and 2000 ASA/World Challenge Corvette tune in the tune file repository...

Actually, you can tune it a lot lower than that 1200 - I have. It will idle at 800 (stock). :D

here you go! :D

I have a tune for a 239/251 on a 106 at home - 2001 346cu, Z06. It's a pretty well developed tune (100s of iterations) :D I'll post it later today.

What a great thread! Thanks for all the great info, guys. :D

Mail sent. :D

I have two ASA tunes. One a 98 and another 2000. Give me your email if you still need them.

FJO dual. But, only single hooked up - waiting on new motor install for dual use.

EFILive - best customer service on the planet. :D

Bump^^^^.
Any ideas???

Cheers,
joel