Search:

I hope so, looks promising.

Thanks, but do you know how to adjust it in the tune tool?

In HP there is a TCC Duty Cycle parameter.

I cannot see the equivalent in EFI, does anyone know where this is?


Thanks

DAVE

thanks I'll try that.

DAVE

BOBFO - I have been measuring the delivered engine torque and the trans torque. BTW the flywheel power uses the delvered engine torque.

Blacky - I thought there was a torque sensor measuring...

I am also interested in this. I have been measuring these values which appear to be half what I would expect.

The max I see is 300 Nm on a car with 300 rwkw. The FW KW which is based on engine...

excellent, so we will be able to richen idle for larger cams now

I was trying to work out how to do that as mine idles smoother at 14.2 than stoich.

I am now looking even more forard to this...

Why has the PE mode been taken out, is their a new funky way to manage AFR under differing conditions?

excellent,

Ross,

What are these tables and what do they control?

DAVE

Cheers

auto

I take it no is the answer, but are the plans to include a PID for the knock sensor signal?

I have heads/cam etc in my car, finished last week. I have the idle very good with once weird exception.

If I put the car in Neutral whilst moving it hunts all around for a steady idle rpm. Quite...

Is it possible to monitor/log the knock sensor(s) signal?

Thanks guys, I'll report back how it goes.

I am still tossing up the advanced course (particulary after the heads/cam/manifold/etc/etc I just paid for) another 1500 AUD will hurt.

If you use a...

Just wondered if anyone has done this course and what they thought.

Too late for me now as I booked for the Melbourne course in Sept.

DAVE

I am planning to stroke my engine to 383ci, if I change the displacement in the vehicle info section will it scale the VE table accordingly or will they always remain for a 350ci, meaning I will have...

The Aussie sites I have seen are no good for tuning. But I do not spend a lot of time looking.

The best book on tuning I have read on tuning: “How to tune and modify Engine Management Systems...

I wonder if this is the right approach.

My unit was out at air similiarly. I am not sure we can assume that it is a simple linear correction across the whole spectrum.

It may be a bias (ie the...

thanks

will there be a PID or someway to log what this spark scaler is?

I am a little puzzled about how ltfts work, in particular when we are in open loop mode.

I understand how they operate in closed loop and I am happy with part throttle tuning.

When tuning for...

Cheers,

I have thought about configuring LC, does anyone have guidance as to how much to lean out? 3%, 5%?

Also any thoughts on the lean out rate and LC enable/disable speeds?