I already checked Holden Crazy for an OS that would work. Is there any way to paypal somebody to do this for me?
Type: Posts; User: exploder; Keyword(s):
I already checked Holden Crazy for an OS that would work. Is there any way to paypal somebody to do this for me?
Heres his tune file
Motor and PCM are out of an 05 model 6.0. OS#12606807. I have flashed the car and removed the VATS and got it to where it will fire up and run. He has installed a NV4500 transmission. I need the...
I swapped bank to bank and it stays the same with the same side being lean and the other rich. I looked around and found some stuff about the heaters not working will cause an issue like this. I am...
First of all I have not crossed the sensors from side to side. I also bought 2 brand new ac delco sensors and installed them. I have the rear 02s turned off. What I am trying to figure out is in...
Try what I said those are the exact symptoms of what I had happening.
Ok I have had this happen to me several times and what I did to fix it is really simple. What was happening was everytime I bought new credits for a car that was coming in to tune I would do the...
I did RAFIG a few times and it kept coming up with negative numbers everytime and eventually as I started applying them after the 3rd or 4rth time it would hardly idle anymore. What causes that? It...
ok I guess I shouldn't have said anything because as soon as I pulled out of the driveway and hit the first stop sign it came back. what else do I need to go in and change based on the log I posted....
My problem isn't that the rpms want to dip or go too low per se but they actually increase and flare back up and down. Ok I went out a logged several idle pids...now what do I do with this info. You...
I have all kinds of problems with this car, but I have got everything sorted except for this. When I originally tuned the car I did Auto VE with the A/c off and had everything as far as driveability...
On a side note I have a small A/C problem I'm fighting. When at a stop with the A/c off the car will idle fine, but when I press the a/c button it will flash for a few seconds and the idle will...
I am happy to say that I went and did a log today and hit 12psi and it felt great. No popping or backfiring and it just pulled strong. I guess the plugs were the culprit all along. Here is a nice...
I am running no maf at all only a IAT and MAP. I have a P0102 code when I check the codes through the instrument panel cluster through the car but the light is not on the dash. Is that wrong?
I think I may have found the problem. I asked my employee what plugs he put in the car and he told me tr6, but he hesitated when he told me. Anytime sombody hesitates when you ask a direct question...
I went and made a few logs today and I think I got the AFR settled, and the timing doesn't just fall off now that I zeroed out the burst knock tables.
The problem now is even with the AF in the...
I was going to go logging again tonight, but it just started raining and with this much power and boost on tap with drag radials I'm asking for trouble. I'm really not sure if my stumble (knock...
Boy do I feel like an idiot....
I'm going to go log it tonight. I will report back what I find.
I unchecked supported and still do not see it. Any other ideas.
OS 02030003 2 bar sd
I went and looked for that PID but I can't find it. I can find 2 different burst knock pids and one was for the e38 and the other for diesel. What am I missing? I don't see it.
On a side note...
I can log burst knock...but why doesn't knock show up on the log? It does have a pretty bad miss when rolling into the throttle right as its coming into boost. Anything else I should log? Here is...
427ci
YSI supercharger
SD tuned
NO METH
I have been working on tuning this car for a buddy of mine and I am getting pretty close, but it is pulling timing in boost and jumping around. I can't...
I did some more logging tonight and everything is going fairly well. I finally rolled into boost and found out my fuel pressure is dropping. I have it set up with a secondary fuel pump to kick in...
I had already gone back and made the 105kpa colums the same. I am also going back to change the injector tables. The car is a ETC vehicle, but what other TP pid are you talking about? Do you mean...
I did a good bit of driving today and got it semi close to where it needs to be. Tommorow when the roads are dry I'm going to slowly start rolling into boost and I hope all goes well. If anyone has...