Search:

Type: Posts; User: robertryan23; Keyword(s):

Search: Search took 0.00 seconds.

  1. oh and i dialed in the tune over the weekend at...

    oh and i dialed in the tune over the weekend at the dyno. Ran out of fuel pump at 540 rwhp...so on to fixing that and it will finally be good to go
  2. example.... Normal 14.7 stoich....at 14.7 g/s...

    example....

    Normal 14.7 stoich....at 14.7 g/s of airflow the computer needs to deliver 1 g/s of fuel.....

    now for the scaled 29.4 afr...at 14.7 g/s of airflow the computer delivers .5 g/s of...
  3. Abbott.....Heres why scaling using just stoich...

    Abbott.....Heres why scaling using just stoich AFR and Injector flow rates make sense...

    If you double the air to fuel ratio, you are saying that the fuel you are using takes twice as much air as...
  4. and with both of those scaled tune files i havent...

    and with both of those scaled tune files i havent turned closed loop back on. so nobody use those and run with them bc they are not put back together
  5. i also have a file where i didnt use the g/cyl...

    i also have a file where i didnt use the g/cyl scaler in the spark tables. I just found through testing that you didnt need to interpolate and to use this scaler instead. either way you still will...
  6. here they are....including the original

    here they are....including the original
  7. see...

    see http://forum.efilive.com/showthread.php?16656-Stock-ls7-with-procharger-6psi-65-injectors-tune-help/page2
  8. Replies
    8
    Views
    7,288

    just finished tuning my 07 Z06 ls7 with a 6psi...

    just finished tuning my 07 Z06 ls7 with a 6psi procharger setup. If you need any info or help let me know the specifics.
  9. So basically what i am saying is, i scaled it. I...

    So basically what i am saying is, i scaled it. I went that route. Thats what caused me to do all of this testing. It did not work when those two tables were scaled(min idle airflow, cranking idle...
  10. Yeah I maxed out the Inj flow rate with the...

    Yeah I maxed out the Inj flow rate with the ID850's. But through many tests, I found that on this 07 Z06 with an E38, the min idea air and cranking idle air tables do not need to be scaled. I tested...
  11. Well I actually switched to ID850's and meth...

    Well I actually switched to ID850's and meth injection and was able to figure it all out. I learned a ton of things about the E38 along the way that many people watching Greg's DVD's would get...
  12. Need help. Scaled tune with ID850s wont start.

    fixed
  13. Think i figured out my own question. .0078*2 =...

    Think i figured out my own question. .0078*2 = .0156. Therefor the resolution of the this pcm is only .0078. Thats makes giggle a little bit. Injector dynamics equipment is far above and beyond the...
  14. Small Pulse adjust issue on Z06 E38 PCM. EfI Live is changing my values.

    When putting in small pulse adjust table for ID850 injectors, Efi live changes the values that I enter when I save and reload the tune. If I put in a value of .011 it changes the value to .007813. If...
  15. Yeah no doubt. I already bought efi and it is set...

    Yeah no doubt. I already bought efi and it is set to be here tomorrow. I've played around with the demo program and just wanted to see if anyone had some example tunes or any ideas
  16. LS7 with 6psi procharger kit and 65# injectors tune help

    I have a 07 Z06 that I am putting a procharger 6psi tuner kit on and 65# injectors. I just purchased EFI live and wanted to get some suggestions on how to tune it. I am pretty experienced with...
  17. Stock ls7 with procharger 6psi 65# injectors tune help

    Hello everyone. I am putting a P-1sc procharger tuner kit on my 07 Z06 w/ 65# injectors and wanted to see what suggestions you all might have for how to go about tuning it. Any information would be...
Results 1 to 17 of 17