I have noticed for quite some time now that some of the BB pids for the 6 speed don't work. I know that there is quite a few that are not working but for starters a important one like TCCSLIP does not work. I found that this is not actually calculating slip at all, it only shows a value when the turbine speed is faster than input speed. This is when coasting and the convertor is not locked like when coming to a stop. When you are on the gas when the convertor is unlocked you still get 0 rpm for a reading and it should be showing some slip. When input speed exceeds the turbin speed (unlocked or slipping convertor) it shows 0rpm therefore if the trans is actually slipping you will not see it at all. Anybody else see this?