2.5 bar map sensor

[JOHNBOY]

What about using an LB7 Dmax MAP sensor?
3 bar

http://www.powerandsignal.com/docs/P...s/09373269.pdf

http://www.powerandsignal.com/docs/P...r_brochure.pdf

[nevinsb]

According to that sheet it is a 3.3BAR sensor?

Hopefully I get a chance to look at it later.

[JOHNBOY]

According to that sheet it is a 3.3BAR sensor?

Hopefully I get a chance to look at it later.

Same one as on my Dmax trucks. Maxs out at 37psi MAP or 32psi boost. Should work well. Uses the same connector. Pretty common part in junk yards. I have a spare one here I plan on using in my 6.0l LS turbo build.