I've known about the CRL but am of the impression that the 08 Corvette would require a clutch relearn as well.
Anyone done this or have a link to site with steps to take to complete clutch relearn?
I've known about the CRL but am of the impression that the 08 Corvette would require a clutch relearn as well.
Anyone done this or have a link to site with steps to take to complete clutch relearn?
2015 Z06 A8
We have the Clutch Learn function in EFILive, in the DVT's of the scantool. You can also log the learn voltages once done.
ChuckCow on here has done it I am sure, initially with the TechII but in the end I think we got it working with EFILive too.
Cheers,
Ross
I no longer monitor the forum, please either post your question or create a support ticket.
I don't have any documentation on it as the instructions are on the TechII (which I have on loan to someone at the moment).
But from memory all you need to do is press the clutch in fully, press the "Clutch Pedal Learn Reset" button in the DVT panel.
Then let the clutch out and turn IGN off for 20 seconds.
You can monitor the status of the relearn using the PID's -
GM.CPPALRNST "Clutch Pedal Fully Applied Position Learn Status"
GM.CPPALRN "Clutch Pedal Fully Applied Learned Voltage"
GM.CPPRLRN "Clutch Pedal Released Learned Voltage"
The last two must show valid voltages once the learn is complete.
Cheers,
Ross
I no longer monitor the forum, please either post your question or create a support ticket.
So there is some variable voltage associated with pedal position?
2000 C5 Coupe, 6M, Callies/Mahle stroked LS7 (441), Blackwing, Halltech, LS3 intake, 90mm Shaner TB, ported L92 heads, FAST 50# inj, not too much cam, Kooks 1 7/8" headers , 3" catless mid pipes, Z TIs, track suspension, , 3:90 rear, EFI V2, LM-2, etc.
PowrMax Performance
100 mm PowrMAF
LM-2 EFILIve package with TAQ -sLM2 V-2 serial cable> Package deals
Just had a conversation with a GM Master Tech. There is no clutch relearn for the manual transmission. The clutch relearn applies to auto tranny only.
Bruce Melton confirmed same thing based on his experiences.
Thanks Bruce!
2015 Z06 A8
Last edited by gmh308; March 8th, 2009 at 10:25 AM.
I have not heard back from Chuck. I went to a source I trust, after all, he is a master tech. Now, if you are saying he is wrong, can you share the process for a clutch relearn and what vehicles does it apply to?
Check out the thread: http://corvettemechanic.com/forum/c6...t-year-c6.html
2015 Z06 A8
Chuck is on a road trip so don't expect an answer from him until tomorrow.
www.redline-motorsports.net
1-954-703-5560
2006 ZO6 895/866 with APS TT
2010 SSRS Camaro HTR-900TT (798/801)
2011 HTR-850R Camaro
2012 ZL1 Auto (10.33@135 MPH) Video Here!