Is there an easy way to convert a DSP2 tune to a DSP5 tune, or do I have to start with another standard *.tun file and copy and paste all of the tables that are different?
Is there an easy way to convert a DSP2 tune to a DSP5 tune, or do I have to start with another standard *.tun file and copy and paste all of the tables that are different?
Black Max....
'03 2500 4x4 CC/LB; HTT SS-66/16/71, EFILive DSP-5 & tunes by McRat , II Mod CP3, PPE Lift Pump;
RDL Uppies, Banks Intake, Exhaust;
ATS Stage 3 w/CoPilot , by Top Jimmy Performance, Mike L Cooler;
AeroForce Dualscan Gauges.
Copy / Paste the tables over is the only way, but given there is only 10 or so pressing Ctrl-C , Ctrl-V 10 times isn't too much of a drama.
Cheers,
Ross
I no longer monitor the forum, please either post your question or create a support ticket.
Black Max....
'03 2500 4x4 CC/LB; HTT SS-66/16/71, EFILive DSP-5 & tunes by McRat , II Mod CP3, PPE Lift Pump;
RDL Uppies, Banks Intake, Exhaust;
ATS Stage 3 w/CoPilot , by Top Jimmy Performance, Mike L Cooler;
AeroForce Dualscan Gauges.
I wrote some scripts to copy everything in your "B" tables into your corresponding "A" tables.
http://www.socaldiesel.com/2EFILive.htm
www.socaldiesel.com
EFILive-DSP5......Switch your Attitude!
EFILive-CSP5......The Smart Way To Switch Your Cummins Tunes!
EFILive-DSP4......Switch Your Colorado and Canyon Too!
Now that's an even easier solution!
I no longer monitor the forum, please either post your question or create a support ticket.