Results 1 to 3 of 3

Thread: Using NB sensor?

  1. #1
    Member
    Join Date
    Mar 2009
    Posts
    92

    Default Using NB sensor?

    is it possibly to use a NB sensor accuratly? or is it worth the $400 odd for a decent WB AFR sensor. also does the sensor stay on the car? or do you take it off when done tuning?

  2. #2
    Lifetime Member mr.prick's Avatar
    Join Date
    Nov 2006
    Posts
    3,195

    Default

    Get a WBO2, they can be had for around $200.
    NBO2's don.t cut it for WOT tuning.

    Mine is permanently installed.
    512k RoadRunner Firmware 12.14R
    FlashScan V2 Bootblock V2.07.04 Firmware V2.07.22 EFILive V7.5.7 (Build 191) V8.2.1 (Build 181)
    LC-1 WBO2

    _________________________________________________

  3. #3
    Lifetime Member GAMEOVER's Avatar
    Join Date
    Aug 2008
    Posts
    1,304

    Default

    I don't trust NBO2's for tuning WOT either. WBO2's is the only way to go.
    My LC-1's are permanently installed on both my vehicle's too...
    2008 2WD Ext.Cab Silverado 1500 6.0 V-MAX E38(L76) & T42(4L70E) MAF Only CL Corvette Servo AFE CAI INNOVATIVE LM-2 WBO2

    FLASHSCAN V2 & AUTOCAL

Similar Threads

  1. TP sensor
    By Slowrc in forum Gen III V8 Specific
    Replies: 3
    Last Post: January 29th, 2009, 06:24 AM
  2. DTC O2 sensor
    By hymey in forum General (Petrol, Gas, Ethanol)
    Replies: 5
    Last Post: February 16th, 2008, 11:18 PM
  3. TPS sensor?
    By DaddySS in forum General (Petrol, Gas, Ethanol)
    Replies: 0
    Last Post: December 10th, 2007, 01:28 PM
  4. Anyone know of a 1.5 bar MAP sensor?
    By mistermike in forum General (Petrol, Gas, Ethanol)
    Replies: 2
    Last Post: August 19th, 2007, 08:57 PM
  5. IAT sensor
    By Chevy366 in forum Lounge
    Replies: 6
    Last Post: August 3rd, 2007, 11:49 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •