Results 1 to 10 of 10

Thread: VS Commodore wont detect chatter

  1. #1
    Junior Member
    Join Date
    Jan 2009
    Posts
    16

    Default VS Commodore wont detect chatter

    Ive bought the full version and am having problems.

    I bought it for my modified VS but cannot detect chatter.

    It works fine on my VT, i immediately swap over to my VS and nothing.

    My memcal on the VS is re-burned and the VT is stock.

    A little bit annoyed...

  2. #2
    EFILive Developer Site Admin Blacky's Avatar
    Join Date
    Mar 2003
    Posts
    9,490

    Default

    You need to use different vehicle definitions for most different vehicle/engine combos:

    VT V8 uses: gmh-vt8.xml
    VT V6 uses: gmh-vt6.xml
    VS V8 uses: gmh-vr68vs8.xml
    VS V6 uses: gmh-vs6.xml

    Also, the VS V8 does not chatter, so you won't see any chatter when connected to the VS V8.

    Regards
    Paul
    Before asking for help, please read this.

  3. #3
    Junior Member
    Join Date
    Jan 2009
    Posts
    16

    Default

    Im using the right definition for the VS V6 gmh-vs6.xml. It just wont connect. Ive tried every different combination and nothing.

  4. #4
    Junior Member
    Join Date
    Jan 2009
    Posts
    16

    Default

    Does anybody have any idea? Ive got a problem with the car and need this to work!

  5. #5
    EFILive Developer Site Admin Blacky's Avatar
    Join Date
    Mar 2003
    Posts
    9,490

    Default

    Turn on the View->Show Serial IO option.
    Then try logging data.
    Stop logging after about 5-10 seconds.
    Right click in the text area and select: Copy All.
    Paste the text into an email (or this thread) and I'll take a look.

    Regards
    Paul
    Before asking for help, please read this.

  6. #6
    Junior Member
    Join Date
    Jan 2009
    Posts
    16

    Default

    LOL i worked it out literally 10 mins ago. Thanks anyway.

  7. #7
    New Member
    Join Date
    Aug 2009
    Posts
    5

    Default

    what did u do to figure it out as i had the same problems with my vs v6, the "no chatter found" what was the problem in the end?

  8. #8
    Junior Member
    Join Date
    Jan 2009
    Posts
    16

    Default

    You just need to press the ''start aldl'' icon.

  9. #9
    New Member
    Join Date
    Aug 2009
    Posts
    5

    Default

    haha your kidding me, that simple....so you have to start the aldl as well as the chatter, cause one wont work if the other isnt running i presume!!!

  10. #10
    Junior Member
    Join Date
    Jan 2009
    Posts
    16

    Default

    No just start aldl. No need to press chatter.

Similar Threads

  1. HELP, EFI live cannot detect pcm/ecm/tcm
    By bigblackdiesel in forum Duramax LB7
    Replies: 8
    Last Post: June 3rd, 2010, 02:29 PM
  2. Vibration/chatter under hard acceleration
    By LostCause in forum Lounge
    Replies: 2
    Last Post: January 20th, 2010, 01:42 PM
  3. V4 wont display chatter on vr commodore v6
    By Kevvrv6 in forum EFILive V4
    Replies: 4
    Last Post: March 12th, 2009, 04:11 PM
  4. VX and VY commodore
    By Thumper in forum Gen III V8 Specific
    Replies: 1
    Last Post: February 8th, 2009, 10:48 AM
  5. 07 VE commodore
    By ALRAJHI in forum Gen IV V8 Specific
    Replies: 3
    Last Post: October 6th, 2007, 07:44 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •