When the ECM goes into PE I'm getting commanded EQ values of .829. I have dual LC-1s and these read AFRs in the low 11s so I know PE commanded EQ can't be what EQ_RAT is logging.
Has anyone seen this?
I was not logging commanded AFR so I don't know whether this is correct or not. In previous logs, closed loop AFR/EQ is 14.68/1.
Also the GM.EOILTS always reads -40. ENGOILP and TFT read as expected and the oil temp gauges work. Is there another PID for oil temp that I'm missing.