Code C0561

[fastsccaguy]

After tuning, it throws a C0561 code "System Disabled Information Stored EBCM" If I flash the stock tune back in, it does not do it. Obviously, there is a correlation there. I'm not sure what is causing it in the .tun file. Anyone run into this before?

2005 with an E40 ECU

Thanks in advance

[GMPX]

Sorry, no idea on that one.

[eboggs_jkvl]

The best I can do is this. Look near the bottom of the first post.


http://www.ls2.com/forums/showthread...23#post2860923

Elmer

[fastsccaguy]

Thanks for the replies all.

I ended up going through the differences one by one. (Long and tedious!!) It is directly correlated to the high frequency fail on the MAF. I had it set to 0. The stock # is 13500. I did not turn off the reporting parameter for it. I will try turning it off tomorrow with the high freq. at 0.

Elmer, that sheds more light on it for sure!!