Results 1 to 3 of 3

Thread: IFR table for red 30# Bosch gen 3 injectors

  1. #1
    New Member
    Join Date
    Dec 2008
    Posts
    2

    Default IFR table for red 30# Bosch gen 3 injectors

    I bought these injectors new "flow matched", when i got them there was only one number hand written on box, 315 cc @ 37#. Seems odd to me they would flow at 37. Maybe 39 as a ford pressure, but 37 sounded strange to me. Called vendor, said many were flowed and matched up in groups. No real answer about the 37 or 39 pound rating. I also ask if they needed to convert from hepthane to gasoline, also got a vague answer. Odd to me 315@39 works out to exactly 30.00 lbs. If they are actually 315@37 , they would be 30.8@39lbs. They will be used @ 58 lbs where the difference would be 36.44 vs.37.53. Plus the difference of hepthane to gas. Am I splitting hairs? My goal is to be as close as possible so not to work around a big error as I tune ve. How close is close enough without haveing to end up with a right answer for a wrong equation in the tune? Doing full ve, rescale maf, tune, I want commanded to equal wideband when done. Any suggestions? Thanks in advance.
    Brad

  2. #2
    Lifetime Member hquick's Avatar
    Join Date
    Jan 2007
    Posts
    1,371

    Default

    Try getting in touch with Jon here: http://fuelinjectorconnection.com/shop/
    He should be able to give you some advice/details.
    Howard

    YOU ONLY NEED TWO TOOLS IN LIFE - WD-40 AND DUCT TAPE. IF IT DOESN'T
    MOVE AND SHOULD, USE THE WD-40. IF IT SHOULDN'T MOVE AND DOES, USE THE
    DUCT TAPE.
    IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM.


    98 K1500 'HOLDEN' Suburban.
    Custom Whipple SC, Mercruiser Marine intake, 0411 PCM, 4L80E w/shift kit

  3. #3
    New Member
    Join Date
    Dec 2008
    Posts
    2

    Default

    that's where I got them. And the canned answers. Thats why I'm asking here.

Similar Threads

  1. BOSCH Fuel Injectors 0280155868
    By mr.prick in forum Gen III V8 Specific
    Replies: 24
    Last Post: February 11th, 2020, 12:46 PM
  2. IFR table values with 36LB FAST injectors
    By Kurtomac in forum Gen III V8 Specific
    Replies: 8
    Last Post: July 6th, 2008, 10:33 AM
  3. Bosch ECM controller i.d.
    By forcefedjunkie in forum Duramax 06 LLY / 06+ LBZ & LMM
    Replies: 3
    Last Post: June 11th, 2007, 07:47 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •