You can zero out the pilot tables and it still shows 240 US and 3.5 mm3. I tried going down to .1 and it still had 240 US and 3.5 mm3. When you zero out even the 0-30 mm3 pilot and pilot 2 tables (which shouldn't even be working at 105 mm3 and wot) then you can get the US down to 150, still at 3.5 mm3 pilot. There is no way I can find to get it down below that, other than to not allow more than 1 pulse in the fuel pressure area, but then you lose your timing.
Oh, I also tried negative pilot since 0 didn't work and I noticed it was available in the limits. That doesn't work at all, cut my timing back to 6.5 degrees total at wot.
Jody