Results 1 to 3 of 3

Thread: Dying Problem

  1. #1
    New Member OrangeFlash05's Avatar
    Join Date
    Apr 2009
    Posts
    3

    Default Dying Problem

    Just wanted to post up and see if i could get some help on my truck dying. I just recently installed a G5x2 cam. We converted over to speed denisity tunning. Now that we did that my truck will randomly die after coming to a stop. It goes into reduced engine power and then dies and will not start back up. I have to reflash the tune into the truck for it to crank back up. I have posted a few attachments one being the tune, and the other 2 are when the car dies. It seems to only do it when the car is in gear...if I let it idle in park it will run forever, but I even tried putting the emergency brake on and let it idle in gear and it would die every time.
    Attached Files Attached Files

  2. #2
    Lifetime Member limited cv8r's Avatar
    Join Date
    May 2005
    Posts
    567

    Default

    More info please. What type of vehicle/Eng size/Cable or ETC throttle, cam specs.What is the history of the tune in the vehicle now?
    It's all good until it goes "Bang"

  3. #3
    Senior Member exploder's Avatar
    Join Date
    Aug 2008
    Posts
    141

    Default

    Truck is an 05 chevy 1/2 with a 5.3 and a ETC throttle. Cam specs are in the 230s...LG motorosports g5x2. I have been trying to help him with the tune, but I am not that great. A few things of note

    1. Tuned in SD
    2. He left the MAF plugged in and it had none of these problems other than it not running that great....we unplugged the maf and retuned it because it was asking for alot more fuel and that is when the car started dying in gear.
    3. If you plug the maf back in it will not die.
    03 z06 auto
    ver7.5.5 custom OS5
    415 ci
    239/255 .624 lift LSr grind
    16psi
    Meth injection
    PLX WB02

Similar Threads

  1. Car Dying at idle during AutoMAF tuning sessions
    By kwhiteside in forum Gen III V8 Specific
    Replies: 8
    Last Post: July 20th, 2009, 08:25 AM
  2. off throttle dying after tranny swap...
    By Superado in forum Gen III V8 Specific
    Replies: 13
    Last Post: October 14th, 2008, 03:00 PM
  3. PID Problem w/BBB - Asked by Cougar 281 (FRPDES problem)
    By Jasondt2001 in forum FlashScan V2 BB Logging
    Replies: 2
    Last Post: March 23rd, 2008, 02:02 PM
  4. Truck dying on slowdown
    By haynss in forum General (Petrol, Gas, Ethanol)
    Replies: 3
    Last Post: April 24th, 2006, 07:37 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •