YES,Thunder Racing and Geoff sold it to me. Thanks.
YES,Thunder Racing and Geoff sold it to me. Thanks.
Rumble
2002 Z28 B4C
430 cu.in., CAM motion, TH400, MW 9"
10 pt. 4130 Wolfracecraft, weld in SFC,
KOOKS, Jesel, Bogarts, Goodyears,
Etc, et$, e$$, $$$
"I can barely email, let alone TUNE"!
Mr Prick,
Thanks again, your last post was great, at least there is hope. I am real new to this so I hope it all works out. For now my tuner has set up the stock PCM to get the engine to fire and I can do stuff like set valve lash and make sure all the mechanical guages work. Moates site is COOL. I don't want to do full pulls until we get the RR on line. I will have to post some pics of the setup once we get everything right.
Rumble
2002 Z28 B4C
430 cu.in., CAM motion, TH400, MW 9"
10 pt. 4130 Wolfracecraft, weld in SFC,
KOOKS, Jesel, Bogarts, Goodyears,
Etc, et$, e$$, $$$
"I can barely email, let alone TUNE"!
SUCCESS!
First I want to say that all of you guys were Right! It was my fault I gave the tuner the wrong Month for the date.When we did get it right, it all loaded right up. I was looking at the "number" for the month and saying the incorrect month. I am an official "KNUCKLEHEAD"! The engine is coming alone just fine, we are getting close to a good tune. Next we will get the RR on Line withh the engine.
Thanks again.
Rumble
2002 Z28 B4C
430 cu.in., CAM motion, TH400, MW 9"
10 pt. 4130 Wolfracecraft, weld in SFC,
KOOKS, Jesel, Bogarts, Goodyears,
Etc, et$, e$$, $$$
"I can barely email, let alone TUNE"!
Good Info. It takes more time for me to understand it than the RR to use it!
Rumble
2002 Z28 B4C
430 cu.in., CAM motion, TH400, MW 9"
10 pt. 4130 Wolfracecraft, weld in SFC,
KOOKS, Jesel, Bogarts, Goodyears,
Etc, et$, e$$, $$$
"I can barely email, let alone TUNE"!
Hey man, I did that the first time as well. Couldnt figure out for the life of me why it wasnt registering my license data. I finally went back through and retyped everything and realized I put the wrong month in too.
Now get tuning! And Idaho Falls huh? Another NW guy on here, good!
~Erik~
2013 Sonic RS Manual - 1.4L I4T E78, tuned, turbo mods, etc.
2008 TrailBlazer SS 3SS AWD Summit White - LS2 E67/T42, bolt ons, suspension, etc.
2002 Chevy TrailBlazer LT 4X4 Summit White - 4.2L I6 P10, lifted, wheels, etc.
We have had the engine running useing the stock pcm and roughed in a tune. Got it pretty happy on idle, 1200 rpm, remember it's a big cam. Wiped out the wide band sensor on the left side (way too rich) so we are running and referencing on only the right side now. I have orered 2 new wide bands from Moates. I replaced the wide band sensor on the left side with my spare but it is still giving me a (4) blinking code. I just downloaded and printed out the Inovate manual so it's back to the shop and try to figure out the blink code problem. But,,,,, we hooked up the RR and everything WAS working and then it lost the (usb port downloads?) and stopped running So we put the stock pcm back in and it ran and we continued to refine the tune some more and the engine is running fairley decent but we are not through with it yet, by far. The tuner gave me the RR, my computer, the EFIlive V2 flashScan, and said to try to figure it out. I think it's for my own good. So here I sit before I return to the shop. I am going to go through all the info tha was on Mr. Prick's last post.
Rumble
2002 Z28 B4C
430 cu.in., CAM motion, TH400, MW 9"
10 pt. 4130 Wolfracecraft, weld in SFC,
KOOKS, Jesel, Bogarts, Goodyears,
Etc, et$, e$$, $$$
"I can barely email, let alone TUNE"!