Dear all,
my wife's Lincoln LS 2001 [made by Ford Motor Company] has SES code. I was wondering if it could be possible to scan the code with EFIlive [which I have for my Camaro] or Autotap [used to use it on the camaro as well]. EFIlive has V1 cable, if that helps. All I need is to read DTS codes, which should be standard OBD-II. Therefore the question is if my scanning HW/SW can support Ford protocol [which should be SAE J1850 PWM vs. GM's VPW].
An attempt to read Lincoln's PCM with EFIlive failed. Is it possible to change the protocol to get basic ODBII info?? Would hate to spend $160, which is what dealer wants for a simple scan.