main VE table

[joecar]

Hmmm... what mods do you have...?

In the tunetool did you set fueling units to AFR or EQ and not Lambda...?

The scantool ben map should be of CALC.BEN_WB1 which is an EQ multiplier (not a Lamda multiplier).

Hmmm... E67... have you read the VVE tutorial(s)...?


You preload the VE table (you did 20%), you flash this, you log against this, then you apply the correction to this...

i.e. you "accumulate" corrections.

[1sikmax]

hmmm... What mods do you have...?

In the tunetool did you set fueling units to afr or eq and not lambda...?

The scantool ben map should be of calc.ben_wb1 which is an eq multiplier (not a lamda multiplier).

Hmmm... E67... Have you read the vve tutorial(s)...?


You preload the ve table (you did 20%), you flash this, you log against this, then you apply the correction to this...

I.e. You "accumulate" corrections.

okay ya thats what i thought, just making sure.
As far as mods its just just a volent (sp) cai, shorty headers, and dynomax bullet muffler....
And i switched my fueling units to eq so will that help out? It was in lambda
what does eq mean anyways??

[joecar]

EQR = stoich/AFR = 1/Lambda

Where stoich is the stoichiometric AFR for gasoline (it will be 14.63 or 14.68 depending on your tune file... see B3601).