how to tune allison tcm with efi

[kingboydmax]

under my calibration window where the alison calibration should be it says not used how do i use this feature?

[Tordne]

Most of the calibration sections should show "Not used", but there should be one or two which relate to the transmission (the others are powertrain related and are N/A for the Allison). It's the sane if you opened a LLY calibration, the transmissions items should shot "Not used".

If this is not the case please send the calibration file to support@efilive.com.

[kingboydmax]

i still cant find the calibration file for the allison

[camcojb]

i still cant find the calibration file for the allison

see the highlighted transmission section on the left? Click that and you'll get the trans tuning parameters. Click on the thumbnail below twice to see it fullsize.

Jody

[Tarkstoys]

mines not there either????

[camcojb]

you guys hooked up to the tcm (not the ecm) and read and saved the tune, right??!!

Jody

[Tarkstoys]

sorry, but very new to the game... I've copied my factory tune, but do I need to go back to the truck and do it over and choose tcm?

[camcojb]

sorry, but very new to the game... I've copied my factory tune, but do I need to go back to the truck and do it over and choose tcm?

yes. Hook up to the truck, open the tune tool, hit the green arrow up top to read calibration info, and when the box pops up make sure you pick the tcm for whatever truck you have (LMM, LBZ, etc.) It will read your tcm tune, you can then save it and make changes and change things in the tune as you wish.

Jody

[Tarkstoys]

Thx, for the quick response! Do you have a retainer fee!LOL

[NCRay]

yes. Hook up to the truck, open the tune tool, hit the green arrow up top to read calibration info, and when the box pops up make sure you pick the tcm for whatever truck you have (LMM, LBZ, etc.) It will read your tcm tune, you can then save it and make changes and change things in the tune as you wish.

Jody

New EFILive user question ref TCM. Do I need to read the ECM and TCM contents separately with two requests to keep the saved files separate or can both be checked and read in one process request but still be saved separately? TIA for the addition info.
Ray