Throttle cracker question

[samh_08]

I was having some low speed idle problems that still existed after autove and RAFIG/PN. I started looking into the TC and TF tables and noticed that my TC in gear tables where zeroed from my 'pro tuner'. So just for the hell of it I put my TC in gear table back to stock; same thing only now I have the car wanting to run away on me. Next thing I did was zeroed the TC in gear table again like the original tuner had, but raised the enable and disable speeds to 15 and 14..PROBLEM GONE!

I was happy I stopped the stalling issue, but Im wonder if I just masked something else that was wrong in my tune. Let me know, Thanks Guys.

Sam

[Baldric]

post up your tune file for us to have a look at champ

[samh_08]

Here she is..Let me know what you think, Thanks.

[Redline Motorsports]

sometimes zeroing out the TC is the only way to reduce airflow to avoid "cruise outa control".

[samh_08]

Well problem existed from the start with the TC cracker zeroed. I 'fixed' the problem by changing the activate and deactivate speeds to 14 and 15, instead of 2 and 2 from the original tune...

Sorry for not being more clear, let me know..Thanks