wot.................................
Otherwise, no, not anywhere I can see. I log pilot 1 through 3, and have logged post injection also (never on), and I only have #1 on at cruise plus the main US, and the two add up to much less than the number in the main injection table. However, when I open the scan tool and the tune, it highlights the cell, and it's never the cell that it should be according to the log. In other words, at a 60 mph cruise I'm at 24 mm3 and 66 mpa, which in the tune would be a 1531 US, yet my main is 639, pilot 1 is 298, and pilot 2, 3, and post injection 1 and 2 are off.
The cell that is highlighted is 20 mm3 and 190 mpa, which has a number of 790. Not sure what that means.
Jody