Current updates - V2 Fails - What Gives?

[JR-CRUZN-C5]

joecar -

Your firstpart is confusing as the new downloads are "self installing" off the EFILive website. Once their in, then YES I did the second part of your post.

After getting the "failed" stuff on self test. Saved my custom stuff then Uninstalled V7 & V8 and reinstalled them off the website along with the "New" firmware, did the second part of your post and still get the 3 failed issues on self test.

My concern is that the 3 "failed" tests will somehow screwup BBL if not, then I am probably good to go, and was good to go with the first firmware download of the 5/20/09 stuff!

It should be noted that if the 3 failed tests don't effect anything, then a NOTE SHOULD HAVE ACCOMPANIED THE FIRMWARE TO AVOID ALL OF THIS!!!

JR

[joecar]

I just wanted to make sure you flashed the new firmware into your V2.

Don't do the self test (when you do it, you may have to reformat the Config/Data spaces and copy the files again)...

I went and did the self test, it failed 2,4,5,6...
then I reformatted all the spaces and copied the files (*.pmm, Options.txt to Config, *.dtc to Scan), set date/time...
and then I was able to do BBL successfully.

Your comment is noted.