loading a new bin??

[joecar]

You should take some logs to see how your tune is performing:

VSS
RPM
DYNCLYAIR
DYNAIR
MAF
MAP
LONGFT1
LONGFT2
SPARKADV
KR
IAT
ECT
TFT
GEAR
TCCMODE
TFMPRS
LASTSHIFT

On the PIDs tab keep the channel count 24 or less.

[2004gmc]

thanx joecar i will try and do that as soon as get a bit of time

[2004gmc]

You should take some logs to see how your tune is performing:

VSS
RPM
DYNCLYAIR
DYNAIR
MAF
MAP
LONGFT1
LONGFT2
SPARKADV
KR
IAT
ECT
TFT
GEAR
TCCMODE
TFMPRS
LASTSHIFT

On the PIDs tab keep the channel count 24 or less.

hey joecar i made a pid list but cant find LASTSHIFT ? also how do i get it on my v2?

[joecar]

Oh, my bad, it is called SHIFTLAST.

To set that pid list in your V2 you have to run V8.1 Scan&Tune...






You set the name/controller in the blue section (rightclick->Properties, select controller, change name)...

then drag pids from the yellow section to the green section, arrange the order of the pids in the yellow section,

watch the green/blue box bargraph at the bottom of the yellow section, when it turns red you have too many pids/channels.

then save and program to V2.

[2004gmc]

thanx joecar i named it after ya