Results 1 to 3 of 3

Thread: EFI Connection "24x" System and LS1 PCM for Early Small-Block Chevy

  1. #1
    Senior Member
    Join Date
    Aug 2006
    Posts
    192

    Default EFI Connection "24x" System and LS1 PCM for Early Small-Block Chevy

    EFI Connection has spent the last year in the development and release of our new "24x" system. This system brings the Gen 3 LS1 PCM (97-98, 99-00, 01-02, 03-06, and E40) to the early small-block.


    Putting the system together to use the LS1 PCM...

    Vortec Timing Cover and 24x Crankshaft Reluctor
    We rely on the 1996-2002 Vortec timing cover to hold our 24x CNC crankshaft reluctor and GM crank sensor.


    Vortec Distributor and Sealed Cap
    We rely on the 1996-2002 Vortec distributor for a 1x cam signal. Our cast aluminum distributor cap allows for the removal of the original distributor cap.


    Wiring Harness
    EFI Connection builds brand new stand alone and several plug and play harnesses for this application. If making your own engine harness, be aware that you must swap injectors/coils 2&3 and 7&4 at the PCM to correct the firing order.

    Calibration Changes
    - Load any 4.8L, 5.3L, 6.0L, LS1, LS6, LS2, etc calibration into the PCM
    - Set {B4001} Injector Flow Rate (a constant for vacuum operated regulators)
    - Change {B3704} Injection Bank Assignments to match the 2001-2002 Express Van calibration (for closed loop operation)
    - Load your preferred spark/fuel calibration (if any)
    - Turn the key and begin fuel/spark correction

    Transmission Selection
    Welcome the 4L60E and 4L80E transmissions to the early small-block without the use of an expensive aftermarket controller. Also get Reverse Lockout functionality of the T56 6 speed manual transmission.

    Electronic Throttle Support
    This also means electronic throttle support for early small block engines. Our prototype engine uses an LS1 Corvette throttle system...thanks to the bolt pattern of the RamJet 350 intake manifold.
    24x LS1 PCM on Early Small-Block Chevy and LT1/LT4
    http://www.eficonnection.com

  2. #2
    Junior Member
    Join Date
    Jul 2005
    Posts
    42

    Default

    This is the best thing to ever happen to early gm vehicles! I have seen this system in action and it is simply awesome! This makes tuning big cams and power adders a snap! Good job mike! ill vouch for this system to anyone who has any questions!

  3. #3
    Lifetime Member schwoch1's Avatar
    Join Date
    Jan 2009
    Posts
    202

    Default

    Quote Originally Posted by LSRacing View Post
    This is the best thing to ever happen to early gm vehicles! I have seen this system in action and it is simply awesome! This makes tuning big cams and power adders a snap! Good job mike! ill vouch for this system to anyone who has any questions!
    I'll second that and also willing to help, my conversion is in the tuning process and going great!!!

    Mike

Similar Threads

  1. Coil Brackets - Small Block Chevy and LT1
    By S10Wildside in forum Conversions / Aftermarket Parts
    Replies: 2
    Last Post: September 5th, 2009, 11:56 PM
  2. EFI Connection "24x" System and LS1 PCM for LT1/LT4 Engines
    By S10Wildside in forum Conversions / Aftermarket Parts
    Replies: 1
    Last Post: May 26th, 2009, 12:54 PM
  3. Newbie Question: connection and "tuning"
    By Player87 in forum Gen III V8 Specific
    Replies: 2
    Last Post: February 5th, 2009, 04:20 AM
  4. EFILive "Classic"/"Legacy"/"Historic"?
    By emarkay in forum FlashScan V2
    Replies: 6
    Last Post: November 2nd, 2008, 01:48 AM
  5. "Service Brake System" message after tune change
    By mtnman in forum General (Petrol, Gas, Ethanol)
    Replies: 0
    Last Post: September 11th, 2005, 01:26 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •