Reformatting laptop hard drive: Question about EFILive

[DrkPhx]

Hi,
I have to reformat the hard drive on my lap top and wanted to make sure I didn't have problems when reinstalling EFILive. So I have some questions.

- - Can I just burn my existing version to a CD for reinstallation? or
- Do I just download the versions I currently run from this website; or do I need to reinstall from the original CD? I assume I would need to enter the keys and license info again.

I already backed up my tunes and logs, so I just want to make sure everything works fine (including the BB) once the laptop is fine. Any help or advice is appreciated.

Here are the current versions I run.

Flash/Scan: V7.5.4 (build 66)
Firmware: 2.5.20
Bootlock: 2.5.08

[poolshark021]

You will need to download and re-install the software again. This would include entering all your registration info again. Just copying the files to a cd won't work because it won't transfer things like registry information.

[joecar]

+1.

Also, you will need to either keep using your old versions (from your CD), or update to the new ones...

If you update the software, it will expect V2 firmware/bootblock to also be updated...

but updating V2 is tricky... read this carefully before proceeding...

[mr.prick]

That firmware is old,
I suggest reading up on the current version of the software and firmware
and decide on whether or not you want to use the latest release.

[ScarabEpic22]

Actually ALL of those are REALLY OLD. Current version is 7.5.5 build 86, bb 2.06.02, and fw 2.06.10.

Just download the latest releases from the main page when you get your PC up and running. Also, if you want to save your MAPs, PID selection, etc backup the My Documents\EFILive\ folder (it also saves your reg info so you wont have to re-enter it). Copy it back then install the latest versions, you'll be good to go! Then open up EFILive Explorer and it will walk you through upgrading your boot block and firmware.

[DrkPhx]

I updated to the most current sofware, but now the BB is not displaying anything (both in pass thru and BBL mode) and when I tried to connect to a vehicle I see a USB driver not installed message. I also don't see my current licences displayed as previously.

[DrkPhx]

I fixed the USB driver by manually installing the driver through the device manager. Pass through tuning and scanning work fine, however I can't access BBL anymore. I try selecting the PID (F1) and it doesn't work. It also won't let me edit settings or access the scan tool (F2).

I did update the bootblock and firmware to the latest version.

[joecar]

You have V7.5 build 87 and V8.1 build 55...?

Bootblock 2.06.02 and firmware 2.06.10 May 25...?

Did you format the Config and Data spaces...?

You probably want to edit your Options.txt file by using Scan&Tune->BBL.

Then you use EFILive Explorer to copy the *.pmm files and the Options.txt file to the Config space.

I know, it's tedious.

[DrkPhx]

The BBL is now working. However I don't see the same PID selection as previously displayed by year; only by (sample). Can I just update my previous options.txt file to the BBL or do I have to manually select them again by starting over?

[joecar]

The Options.txt format has been changed...

use the Scan&Tune program to create a new Options.txt.