Current updates - V2 Fails - What Gives?
I just downloaded V8.1.2 Bld55, V7.5.5 Bld87, and V2.06.10 Firmware and now my V2 does not work. Get error $0483. Get failed #4, #5, & #6 when I run self tests.
Cmon don't you think this is ridiculous. It is 5/25/09 and if there is a bug it should have been removed from the down load materials!!!
JR
I need assistance!
Last edited by JR-CRUZN-C5; May 25th, 2009 at 04:11 AM.
Try this
FSProgV2_06_10_May_25.efw
512k RoadRunner Firmware 12.14R
FlashScan V2 Bootblock V2.07.04 Firmware V2.07.22 EFILive V7.5.7 (Build 191) V8.2.1 (Build 181)
LC-1 WBO2
_________________________________________________
Apparently its now worse - Trying to select PIDS I get "Options.txt not found". I don't use any wide band and now the self test is in a loop and will not complete! Had error $0483 with the first V2.06.10 download! There are no config files down and I can't move any down I get Error $1082 not formatted! This is turning into quite a mess!
What next?
JR
Last edited by JR-CRUZN-C5; May 25th, 2009 at 04:18 AM.
Have you read this (see attached)...?
You need to copy Options.txt from your PC to your V2 using either EFILive Explorer (EE) or Scan&Tune (S&T).
What were the bootblock/firmware versions before you updated...?
Joecar -
Where is that info. never did that before? (with an update) I downloaded off the MAIN website and you might think there would be a note or two about it!
JR
HAD:
V8.1.2 Bld44
V7.5.5 Bld86
V2.06.06 FMWR
V2.06.02 BB
All worked perfectly and was updated periodically with no problems so what is going on with the new upgrades???
Now that we are back to complicated updates please give me the steps to get this working again - Thanks
JR
Last edited by JR-CRUZN-C5; May 25th, 2009 at 04:59 AM.
Jorcar -
Reformatting and "doing" the config files using the Firmware off the main site the self test FAILS like in my top post!!! SOMETHING IS WRONG WITH THE UPDATE!!!!
LETS GET IT FIXED SO I / WE CAN GET BACK TO USING THE V2.
JR
Mr. Prick -
Your Firmware fails self test #2, 4, 5, 6 not just 4, 5, & 6
JR
It's working fine for me,
are you having problems flashing because of this?
Look in C:\Documents and Settings\All Users\Application Data\EFILive\V8\Config
for the options.txt, if you don't have it there search you computer for it.
512k RoadRunner Firmware 12.14R
FlashScan V2 Bootblock V2.07.04 Firmware V2.07.22 EFILive V7.5.7 (Build 191) V8.2.1 (Build 181)
LC-1 WBO2
_________________________________________________
Havn't gone that far yet - just doing the update. My Vette is in the trailer ready for next weekends event. Not looking forward to going to the drags and find out V2 doesn't work!!!
JR
works fine for me (not helpful, I know). I initially had issues that made no sense, so I un-installed 7 + 8, downloaded the latest 7,8+firmware, installed the lot then it updated the firmware and everything was hunky dory again. I've no idea if there was an error (other than user) eally apparent though.
Jim
2000 LS1 M6, No EGR/Air/PS/CATs. TR230 Cam, COS3, OLSD, LC1 Wideband fitted, Procharger P1SC, 2 Bar MAP, Siemans Dekka 60Lb Injectors.
All wrapped up in a 2000Lb AC Cobra Replica
Posting Permissions
Reply With Quote