Results 1 to 3 of 3

Thread: Stuttering under acceleration *need help quick*

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    New Member
    Join Date
    Jun 2009
    Posts
    2

    Default Stuttering under acceleration *need help quick*

    I have a 04 LB7 that is having a problem with stuttering. It happens when i get on the throttle and reach something above 2300 rpm. I first thought it was fuel pressure so I replaced a Fuel pressure regulator (it was putting out a code) This did not fix the problem. I then logged balance rates and found 4 bad injectors. Took it to dealership and they replaced them for me and I still have the problem. I have a P0101 MAF code and a P0089 code for the Regulator. The regulator is because I have a K&N FIPK intake and apparently it doesn't work well with the MAF sensor. I would put the stock intake back on except for the fact that I bought the truck with it and the dealer didn't give me the stock filter housing. What I have noticed today is that right after a full reflash the problem will go away and stay gone aslong as I don't shut the truck off. If i shut the truck down and then restart it my problem comes back and stays there unless i do another reflash. How can I go about troublshooting this? I have to tow a trailer on the 9th and would love to have this resolved before then.

    Here is a link of more detail on diesel place
    http://www.dieselplace.com/forum/sho...d.php?t=312209

    I Have included a log file that shows the problem at Frame 153
    Attached Files Attached Files

Similar Threads

  1. Replies: 23
    Last Post: May 23rd, 2010, 08:38 PM
  2. Vibration/chatter under hard acceleration
    By LostCause in forum Lounge
    Replies: 2
    Last Post: January 20th, 2010, 02:42 PM
  3. What tables mimic Acceleration Pump & Power valves?
    By LS1_Dragster in forum Gen III V8 Specific
    Replies: 4
    Last Post: May 28th, 2008, 02:59 AM
  4. Stuttering whilst cruising
    By hquick in forum General (Petrol, Gas, Ethanol)
    Replies: 3
    Last Post: April 27th, 2007, 02:30 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •