Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: Motec PLM Serial Data to V2

  1. #1
    Junior Member
    Join Date
    Sep 2006
    Posts
    38

    Default Motec PLM Serial Data to V2

    Just enquiring whether it is possible to add the Motec PLM to the list of serial devices for V2.

    I have attached the PLM user manual which should have all info required for RS232 data ....

    Cheers
    Kyle
    Attached Files Attached Files

  2. #2
    Junior Member
    Join Date
    Sep 2006
    Posts
    38

    Default

    I know its any old thread ....any chance of this happening Paul?

  3. #3
    Lifetime Member GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,148

    Default

    Paul is on a break for a week, hopefully it won't be 2 years before you get an update
    I no longer monitor the forum, please either post your question or create a support ticket.

  4. #4
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Somehow I didn't see this thread two years ago...

    [ please bump the thread if you don't see a response after a few weeks ]

  5. #5
    EFILive Developer Site Admin Blacky's Avatar
    Join Date
    Mar 2003
    Posts
    9,490

    Default

    I don't see any reason why it can't be done. What would help is if you could hook up the wide band controller described in the pdf document to FlashScan's serial interface.
    Then set up FlashScan to use either the AEM or Zt2 wide band controllers. Use only those two settings because they match the same baud rate as the one specified in the pdf. (i.e. 9600 8,n,1)

    Make sure the Left most orange LED on FlashScan's keypad is flashing - that indicates FlashScan is receiving RS232 data which means the physical connection is ok.
    Then wait for about 5-10 seconds to allow FlashScan time to record some of the RS232 data from the wide band controller.

    Then save a trace file on FlashScan, copy it to the PC using EFILive Explorer and email it to me.
    Also in the email give a brief description of what data the wide band controller was outputting at the time, i.e. Lambda values, or an error, or a status such as "warming up".

    Include a link to this thread so I know what the email is about.

    Regards
    Paul
    Before asking for help, please read this.

  6. #6
    Junior Member
    Join Date
    Sep 2006
    Posts
    38

    Default

    Thanks Paul ,
    Will get onto it as soon as I can .
    Cheers
    Kyle

  7. #7
    Junior Member
    Join Date
    Aug 2009
    Posts
    40

    Default

    Hey guys , have we gotten anywhere with this ? ( sorry to dig out an old thread )

  8. #8
    EFILive Developer Site Admin Blacky's Avatar
    Join Date
    Mar 2003
    Posts
    9,490

    Default

    Quote Originally Posted by APS Luis View Post
    Hey guys , have we gotten anywhere with this ? ( sorry to dig out an old thread )
    Hi Luis,

    If you can do what I explained in post #5, that would help me start implementing support for that MoTeC wide band.
    I don't recall if I ever received any data after my original request, it was a long time ago :(

    Regards
    Paul
    Before asking for help, please read this.

  9. #9
    Junior Member
    Join Date
    Sep 2006
    Posts
    38

    Default

    Quote Originally Posted by Blacky View Post
    Hi Luis,

    If you can do what I explained in post #5, that would help me start implementing support for that MoTeC wide band.
    I don't recall if I ever received any data after my original request, it was a long time ago :(

    Regards
    Paul
    Hi gents,
    I will try to get some data to Paul this week . Would be handy to have this up and running .
    I bought a TechEdge unit so I forgot about this .....

    Cheers
    Kyle

  10. #10
    Junior Member
    Join Date
    Sep 2006
    Posts
    38

    Default

    Hi Paul

    I now have 3 Motec PLM units .... if you have the time can you look at serial integration.

    The PLM manual is here - http://www.motec.com.au/plm/plmdownload/ . It should contain info you require .

    Im happy to help with testing as required .

    Cheers
    Kyle

Page 1 of 2 12 LastLast

Similar Threads

  1. LC1 serial to V2
    By nonnieselman in forum FlashScan V2
    Replies: 6
    Last Post: November 12th, 2008, 01:58 PM
  2. Do I need a PID to LOG serial data?
    By Chalky in forum FlashScan V2 BB Logging
    Replies: 1
    Last Post: May 15th, 2008, 10:16 PM
  3. Do I need a PID to LOG serial data?
    By Chalky in forum General (Petrol, Gas, Ethanol)
    Replies: 0
    Last Post: May 15th, 2008, 05:39 AM
  4. WB serial to LT serial?
    By Bruce Melton in forum General (Petrol, Gas, Ethanol)
    Replies: 9
    Last Post: May 12th, 2008, 09:17 AM
  5. Motec PLM intallation
    By 34Koop in forum General
    Replies: 1
    Last Post: November 7th, 2005, 10:23 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •